TL16C752CPFB

Series:	--
Packaging:	Tray
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Features:	--
Number of Channels:	2, DUART
FIFO's:	64 Byte
Protocol:	RS485
Data Rate (Max):	3Mbps
Voltage - Supply:	1.62 V ~ 5.5 V
With Auto Flow Control:	Yes
With IrDA Encoder/Decoder:	Yes
With False Start Bit Detection:	Yes
With Modem Control:	Yes
Mounting Type:	Surface Mount
Package / Case:	48-TQFP
Supplier Device Package:	48-TQFP (7x7)
Base Part Number:	TL16C752C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:

The TL16C752CPFB is a CMOS single-chip microcontroller integrated circuit (IC) used in telecommunications, embedded systems and industrial control applications. Specifically designed for the later generation half-duplex serial communications, this device provides enhanced features for transmission, reception and data buffering in an ultra-low-power architecture. With flexible data rate support, including external clock, baud rate generator and adaptive line noise immunity, TL16C752CPFB is capable of operating over a broad range of input and output conditions. It is particularly suitable for use in highly integrated systems with limited power and memory constraints.

Interface - UARTs (Universal Asynchronous Receiver Transmitter)

UART stands for “Universal Asynchronous Receiver-Transmitter”, and is a type of serial communication interface used for short-range communication between peripheral devices. UARTs take data from internal hardware components, such as memory, and convert it into an electrical signal for transmission over a local communication medium (e.g. twisted pair wires, coaxial cables, etc.). On the receiving end, UARTs take the inverted signal back into data, which is then processed by the connected hardware. UARTs are popular because they are easy to configure, require minimal communication protocol and are compact, making them ideal for embedded systems with limited resources. TL16C752CPFB is a typical example of UARTs, used extensively in manufacturing and other industrial applications.

Application Field & Working Principle of TL16C752CPFB

TL16C752CPFB is a CMOS single-chip microcontroller integrated circuit used in 4x data transmission with baud rates ranging from 5,000 bps to 2.5 Mbps. Its main features include:

• Half-duplex differential communication interface with built-in signal carriers
• Interrupt-driven data transfer
• Programmable buffer/transmitter sizes
• Automatic parity bit generation for transmit and receive
• Programmable clock and baud rate synchronizing
• Adaptive line noise immunity
• Two separate registers for data transfer
• 100kHz low-power operation
• External clock pin (up to 24MHz)
• Up to nine stand-by modes, including Power-Down Sleep, Low-Power Idle, Idle with Sleep Timer, Critical Idle, and Full Idle

The working principle of TL16C752CPFB is based on the basic UART model, which consists of a transmitter and receiver. In the transmitter section, signals from the sending hardware, such as a microcontroller or memory module, are converted into an electrical signal for transmission. This signal is then converted in the receiver section into data, which is then sent back to the connected hardware.One of the key features of TL16C752CPFB is its enhanced interrupt-driven data transfer. It uses two separate registers for data transmission that can be programmed for 8, 9 or 16-bit wide data transfers. It also offers a wide range of operating baud rates, from 5,000 bps to 2.5 Mbps, with external clock up to 24 MHz. Additionally, TL16C752CPFB offers adaptive line noise immunity which is ideal for a wide range of industrial and telecom applications.In terms of power consumption, TL16C752CPFB is capable of running at 100kHz low-power operation, with up to nine standby modes. This makes the device suitable for battery operated and power-sensitive devices. Its flexibility and low power consumption make TL16C752CPFB an ideal choice for numerous applications, ranging from secure networking and industrial automation systems to embedded applications.

Conclusion

The TL16C752CPFB makes use of UARTS for reliable data transmission, flexible baud rates and low-power operation. With enhanced features for signal transmission, reception and data buffering, TL16C752CPFB is a great choice for a wide range of communication and industrial applications. With its flexible data rate support, adaptive line noise immunity and power-saving features, TL16C752CPFB can be used as a cost-effective solution for networks, industrial automation and embedded systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description