TL16C754BPN

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The frequency, clock cycle lengths, and other data matters are what they are in order to ensure that each data packet sent contains enough information that it can be received and decoded properly. The TL16C754BPN (Enhanced Universal Asynchronous Receiver Transmitter) is an integrated circuit designed to facilitate these and other data operations in computers and other electronic devices. This article explains the chip’s application field, provides some information about its architecture, and details its working principle.

The TL16C754BPN is a UART device, meant mainly for use in embedded systems such as laptops, mobile devices, and games. It has also been used in communication devices like modems, printers, scanners and portable electronics. The chip is well known for its great performance and minimal energy consumption, which makes it suitable for battery-powered applications.

The main purpose of the device is to send and receive serial data. As the name implies, it works asynchronously, meaning that it doesn’t need any synchronization between data transfers as well as any other additional prerequisites. It supports a variety of data formats, including Manchester and HALCFF.

Apart from being a UART, this device is also able to control data flow in both directions. For example, the device can be used to stop the data before it’s written to memory packages in the event of an error, instead of simply writing the package and dealing with the messed up packet later.

Architecturally, the TL16C754BPN has three main components: a UART, an address latches and an interrupt control logic. It supports automatic data flow control (DFC) and has an integrated FIFO buffer for 26 bytes of data. It also supports modem status, DTR/ DSR, and DCD/ RI signals for communication control.

The UART component of the device is responsible for the transmission and reception of serial data. This component consists of a data buffer, shift register, receiver, transmitter and oscillator. The data buffer stores the data that’s being sent or received. It also serves as a temporary storage for the received data until an interrupt is sent. The shift register is used to convert the parallel data from the data buffer into a serial format. The receiver is responsible for decoding the incoming serial data and storing it in the data buffer. The transmitter does the opposite: it converts the data from the data buffer into a serial format which can be sent out of the device. The oscillator is used to generate the clock signals needed for communication.

The address latches component is responsible for storing the address of the data that’s being sent and received. The component consists of two 8-bit latches that can store up to 16 address bits. The lower 8 bits are used to select a command in the case of read operations and the higher 8 bits are used to select the data in the case of write operations.

The interrupt control logic component is responsible for generating interrupt signals when certain conditions are met. The component consists of an interrupt logic unit and control logic. The interrupt logic unit generates an interrupt signal when there is an error in the data received or when the device has received a new packet. The control logic controls the status of the interrupt pins and ensures that the interrupt signal is only sent to the system when the conditions are met.

In conclusion, the TL16C754BPN is an advanced UART device that can be used for transmitting and receiving data in embedded systems and other devices. Its unique architecture and integrated FIFO buffer gives it a great performance and makes it suitable for both low- and high-speed serial applications. In addition, its lower power consumption and support for various data formats make it a great choice for any application. P>.

The specific data is subject to PDF, and the above content is for reference