TL5580AID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TL5580AID is a great choice for linear applications such as instrumentation, OP amps, and buffer amplifiers. This component measures only 5x5x2mm and packs a great deal of power in an incredibly small package. This component is specifically designed to optimize size and stability while providing excellent amplification capabilities.

The TL5580AID features a low power drain and is suitable for use in portable and battery operated applications. The wide voltage range combined with the flexible supply current make the TL5580AID suitable for applications ranging from 0.9V, up to 32V. The low parasitic frequency response, combined with the low distortion make the TL5580AID ideal for audio applications.

TL5580AID’s operating principles are very basic and are based on the three major components of a linear amplifier circuit: a resistive load, a feedback network, and an input stage. The input stage uses a transistor or power MOSFET for amplification. The resistive load is determined by the transistor/MOSFET chip’s output resistance, which varies with the voltage and current. The feedback network controls the gain and ripple of the output signal, depending on the resistor values.

The input signal is applied to the base of the transistor/MOSFET, and the output voltage is gained using a pair of resistors. The feedback network is composed of a large resistor and capacitor, which limit the high frequency responses from the input signal. This allows the amplifier to attain its steady-state characteristics and allows for excellent stability without having to be overly concerned about stability problems. The gain of the TL5580AID can also be adjusted using an external resistor, allowing for varying gain levels.

The TL5580AID operates in either Class A or Class B and can be configured to operate in either mode. In Class A mode, the input signal is amplified directly and the output is limited to the peak-to-peak rating of the amplifier, while in Class B mode, the maximum output current is doubled, providing higher output power than in Class A mode. The TL5580AID is able to drive loads of up to 500 ohms at 10V with an input signal of 10mV.

In addition, the TL5580AID is designed for low-noise operation and provides low harmonic distortion. The device is able to reduce harmonic distortion over a wide frequency range. This wide frequency response coupled with high linearity, make it suitable for accurate signal reproduction in audio applications.

The TL5580AID is a great candidate for any linear applications, ranging from instrumentation, OP amps, buffer amplifiers, and other applications that require precision signal performance. The device is designed for extreme performance and suitability in a variety of applications and environments. Its small size, wide voltage range and low parasitic frequency response make it ideal for portable applications as well.

The specific data is subject to PDF, and the above content is for reference