TLC25M2CD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TLC25M2CD is a low-power, low-voltage linear amplifier designed to power instrumentation, op amps and buffer amps. The TLC25M2CD is capable of amplifying signals from 1Hz to 5MHz, and it has a slew rate of up to 1.2V/µs. It can provide up to 2A of current, making it suitable for driving a wide range of loads. The TLC25M2CD can be used for amplitude and frequency modulation applications, as well as for spectrum analysis and data acquisition tasks.

The TLC25M2CD has four terminals, including a positive supply voltage connection, a ground connection and two output ports. The positive supply voltage can be in the range of 2.7V to 7.5V, while the output voltage range is 0V to 1.2V. The output current is limited to 2A, and the bandwidth is between 1Hz and 5MHz.

The TLC25M2CD is a single-ended amplifier, so it will not provide the same output current as a complementary amplifier. The TLC25M2CD can still provide a high gain, with a typical gain of 20dB. This makes it suitable for signal amplification applications that require a high level of gain.

The TLC25M2CD can be used in two distinct modes. The first mode is the "High Gain" mode, which provides a higher gain than the other mode. The other mode is the "Low Noise" mode, which provides a lower gain but with an improved noise performance. Both of these modes can be set using the on-chip trim pot.

The TLC25M2CD offers excellent stability and distortion characteristics. The open-loop gain is typically 33dB, and the input impedance is typically greater than 500k ohms. The output impedance is typically less than 2 ohms, ensuring good performance with high load capacitances. The Output Offset Voltage is low, typically less than ±10mV, making it suitable for low-voltage applications.

The TLC25M2CD is an ideal choice for a range of signal amplification applications, especially those operating at low voltage and low power levels. Its excellent noise and distortion characteristics also make it suitable for high-precision applications, and its robust design ensures a long operation life. The TLC25M2CD is a reliable and cost-effective linear amplifier solution for many different needs.

The specific data is subject to PDF, and the above content is for reference