TLC25M4CDRG4

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

The TLC25M4CDRG4 is a low-voltage, low-power CMOS operational amplifier, designed for use in a wide range of application fields. Its small size and low power consumption, coupled with superb parameter matching between devices, make it an ideal choice for a variety of instrumentation and industrial control applications. Due to its low voltage and power consumption, the TLC25M4CDRG4 is highly suitable for battery-powered equipment.

The TLC25M4CDRG4 has two differential input stages, with the ability to drive up to 100 mA. The input stage is designed to provide high common-mode rejection ratios and low distortion. The TLC25M4CDRG4 can also be used as a voltage follower to minimize loading of the output signal source. On the input and output, four connectors provide direct access to the bipolar/unipolar signal.

The TLC25M4CDRG4 is a precision instrumentation amplifier with a wide range of applications. It has a linear voltage gain from 0.6V/V to 15V/V and can be configured to act as a unity-gain amplifier. The TLC25M4CDRG4 has a low common-mode rejection ratio, making it ideal for DC-coupled applications such as active low-pass filters, or as part of an AC-coupled filter, or even as a tolerance/distortion compensation amplifier.

When used as an instrumentation amplifier, the TLC25M4CDRG4 provides excellent accuracy and repeatability. Its high common-mode rejection ratio, along with its low noise, make it well-suited to low-level signals, such as those generated in biomedical applications. It is capable of very precise signal measurement and filtering in a wide range of full/half-bridge, IEPE and bridge-referenced applications.

The TLC25M4CDRG4 can also be used as a Buffer Amplifier. In this configuration, it can be used for output stage impedance-matching and for level shifting of input signal amplitudes. This is especially useful for applications where the input signal may be too low for the amplifier to accept, or for applications where the output impedance is too high for the signal source. By using the TLC25M4CDRG4 as a buffer amplifier, the impedance can be matched and the level shifted, allowing the signal to be amplified by an amplifier at the correct level.

The TLC25M4CDRG4 is a versatile and reliable amplifier, capable of being configured for a variety of applications. Its low-voltage and low-power usage, together with its excellent parameter matching between devices, makes it an ideal choice for instrumentation, industrial control and other applications.