TLC271CP

Voltage - Input Offset:	1.1mV
Base Part Number:	TLC271
Supplier Device Package:	8-PDIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	0°C ~ 70°C
Voltage - Supply, Single/Dual (±):	3 V ~ 16 V, ±1.5 V ~ 8 V
Current - Output / Channel:	30mA
Current - Supply:	950µA
Series:	LinCMOS™
Current - Input Bias:	0.7pA
Gain Bandwidth Product:	2.2MHz
Slew Rate:	5.3 V/µs
Output Type:	--
Number of Circuits:	1
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TLC271CP application field and working principle

The TLC271CP is a low-power precision CMOS op amp that is typically used in a wide range of instrumentation, OPamps, buffer amplifiers, and other signal conditioning circuits. It has a wide input common-mode voltage range (VCM) supported of -1V to 36V and can drive loads up to 150 mA over the temperature range of -40 to +85C. It also has a high open-loop gain of up to 320dB at 25C.The TLC271CP consists of two independent wide common-mode voltage range (V cm ), high output current, and push-pull dual opamp signal conditioning amplifier circuits, each containing four independent differential amplifiers. The four amplifiers can be used to process and condition low-level signals in various applications such as signal amplifiers, instrumentation amplifiers, audio amplifiers, filter amplifiers, etc. The TLC271CP has two main operating modes: power-on reset (POR) and power-down control (PDC). When the PView pin is driven low, the opamp enters power-down mode where VCC is disconnected from the opamp, and the opamp stops. The device also has an enabled/disable mode. The TLC271CP is also featured with an over-temperature protection circuit that activates when the junction temperature exceeds +150C. The TLC271CP utilizes a high-speed, baseline CMOS technology for a wide range of signal-conditioning, processing and control applications. It has a low quiescent current of only 40 mA, allowing it to be used in low-power designs, and it is also capable of driving loads up to 140 mA over a temperature range of -40C to +85C. The device provides high output current, high slew rate of 60V/µs, and fast settling time of only 10 µs to 0.1%.In addition, the TLC271CP has an internal protection circuitry that prevents the opamp from over-voltage and over-temperature conditions, providing advanced protection when used under harmful conditions. The device is also featured with an enable/disable logic control pin, allowing it to be quickly and easily turned ON/OFF with a logic signal.The TLC271CP is suitable for applications including general-purpose signal conditioning, amplifiers, audio processing, instrumentation amplifiers, filter amplifiers, and other types of analog signal conditioning and control circuits. It is also used in power supplies, instrumentation, robotics, medical equipment and automotive systems. The TLC271CP has a wide operating voltage range of 2.7-36V, making it suitable for use in battery-operated systems, as it can be powered by a single lithium-ion battery. It also features low EMI/EMC noise levels, low power consumption, and logic pin compatible with industry-standard digital circuits.In conclusion, the TLC271CP is an ideal choice for low-power, low-noise, and high-precision instrumentation preamplifiers, op amps, and buffer amplifiers. It is also excellent for precision applications, such as medical and automotive systems, where a high-speed, low-noise op amp is required.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description