TLC274ACDRG4

Voltage - Input Offset:	900µV
Base Part Number:	TLC274A
Supplier Device Package:	14-SOIC
Package / Case:	14-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	0°C ~ 70°C
Voltage - Supply, Single/Dual (±):	3 V ~ 16 V, ±1.5 V ~ 8 V
Current - Output / Channel:	30mA
Current - Supply:	3.8mA
Series:	LinCMOS™
Current - Input Bias:	0.7pA
Gain Bandwidth Product:	2.2MHz
Slew Rate:	5.3 V/µs
Output Type:	--
Number of Circuits:	4
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TLC274ACDRG4 Application Field and Working Principle

Introduction

TLC274ACDRG4 is a general-purpose amplifier that belongs to the linear-amplifiers, instrumentation OP amps, and buffer amps category. It is designed to provide robust solutions for a wide range of applications. It is a single rail-to-rail input and output amplifier with a wide voltage operating range that could be used in many applications. It features a high speed operation with an operating bandwidth of up to 4MHz, low distortion, and a wide range of gain and offset settings for improved system performance.

Application Fields

TLC274ACDRG4 could be used in a wide range of applications such as precision on-chip signal conditioning, automotive and medical applications, audio systems, systems requiring low distortion operation, and many other applications. For example, it could be used in medical applications to monitor the vital signals from a patient. In audio systems, it can be used to amplify audio signals from stereo systems, receivers and amplifiers, as well as other audio equipment. It could also be used to amplify signals from many measurement instruments and systems for precise performance in order to obtain accurate results.

Working Principle

TLC274ACDRG4 is a rail-to-rail input and output amplifier which means that it can accept and deliver input and output signals that are within the range of its supply voltage range, from from the negative rail to the positive rail of the power supply. It is designed to provide accurate amplification of input signals, and it is capable of achieving a very high precision by making use of its wide range of settings.TLC274ACDRG4 has two inputs, the inverting (V-) and non-inverting (V+) inputs. The input signals applied to either of these inputs is then amplified by an internal amplifier. The gain of the amplification may be adjusted by setting the gain through the setting resistor, Rg, connected to the amplifier’s feedback. This setting resistor also acts as the output impedance, setting the amount of power that is dissipated back into the amplifier. The gain of the amplifier can also be adjusted by setting the input bias current of the amplifier through the use of the coupled bias pins, VbiasN and VbiasP. The coupling between the bias pins creates a voltage across the Rg resistor, which in turn adjusts the amplifier’s gain. The output of the amplifier is connected to the output pin, OUT. This pin is connected to the output of the internal amplifier and provides the amplified signal. The output signal is then amplified further by an external output amplifier for the required output level. The output of the amplifier is also connected to the OUTTRI pin, which acts as an external output transistor driver. This pin is connected to the output of the internal amplifier and provides a voltage that is proportional to the output signal of the amplifier. It can be used to control external output transistors in order to minimize the power consumption of the system

Conclusion

TLC274ACDRG4 is a general-purpose amplifier that belongs to the linear-amplifiers, instrumentation OP amps, and buffer amps category. It is designed to provide high performance operation and is suitable for use in a wide range of applications. It features a wide voltage operating range, a high speed operation, low distortion, and a wide range of settings for improved system performance. Additionally, it has two inputs, the inverting and non-inverting inputs and can be used to amplify signals from many measurement instruments and systems for precise performance in order to obtain accurate results.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description