TLC542IFNRG3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TLC542IFNRG3 is a 8-bit, 10MHz type data acquisition - Analog-to-Digital Converter (ADC). It is designed with CMOS technology. It features low power consumption and low operating power supply with the advantage of built-in reference voltage source. The device is packaged in 24-pin QFN or 28-pin TSSOP and it is easy to use.

The TLC542IFNRG3 was designed to permit a range of comprehensive system integrations including all kinds of advanced data acquisition applications. It features low hardware overhead and simple programming, making it ideal for a wide range of applications with limited system resources. In addition, the device can be used as a stand-alone, general-purpose A/D converter or can be combined with a microcontroller for more advanced applications requiring multiple conversions. This makes the device ideal for applications such as portable instrumentation, industrial digital inputs, data acquisition and remote sensing.

The TLC542IFNRG3 is a low power, high accuracy, and low cost A/D converter with a programmable gain amplifier (PGA). It has a very wide dynamic range and can be used for data conversion from a wide range of input ranges from single ended signal sources. It also has a sophisticated digital filtering system and a programmable low noise mode to meet stringent A/D conversion requirements.

The TLC542IFNRG3 features an on-chip voltage reference, providing fixed reference voltages of 0.7V, 0.8V, 2.5V, and 3.0V. It also features a programmable sequential sample and hold time to help reduce power consumption. The device can also be operated in low power mode to reduce power consumption when sampling or held at standby.

The TLC542IFNRG3 has a built-in high sampling rate that can reach 250KHz, enabling it to directly measure signals from complex systems. Its low power performance makes it a suitable choice for battery powered applications. With a wide input range and highly flexible ADC design, it is suitable for a variety of applications, for example, linear and nonlinear measurements, measurements in process control, automotive systems, radar systems, ultrasound systems and low frequency instrumentation. In addition, with the built-in reference voltage, it can provide high accuracy readings in these applications.

The TLC542IFNRG3 operates on a single power supply, but automatically converts the input signal from single-ended to differential mode. Its design is highly flexible allowing the user to select from multiple input stages, such as AC single-ended sampling, logic reference ground sampling and differential sampling. It also offers two analog-to-digital conversion modes: full conversion and single-ended conversion. Full conversion enables simultaneous data acquisition from multiple channels, thus providing more accurate results.

The working principle of the TLC542IFNRG3 is based on the conversion from analog to digital, in which the analog signals are sampled at a given rate and are then digitized. The sampling rate of the device is based on the input clock of the device and its accuracy is determined by the resolution of the device. In addition, the device has an internal reference voltage which provides a fixed point when converting analog signals into digital.

The TLC542IFNRG3 is an excellent choice for data acquisition and Analog-to-Digital conversion applications. It can operate with a low supply voltage with low power consumption and features a high sampling rate and built-in reference voltage source. With a wide range of inputs and outputs, it is suitable for a variety of applications, making it a perfect choice for portable instruments and data acquisition systems.

The specific data is subject to PDF, and the above content is for reference