TLC548IP

Number of A/D Converters:	1
Base Part Number:	TLC548
Supplier Device Package:	8-PDIP
Package / Case:	8-DIP (0.300", 7.62mm)
Operating Temperature:	-40°C ~ 85°C
Features:	--
Voltage - Supply, Digital:	3 V ~ 6 V
Voltage - Supply, Analog:	3 V ~ 6 V
Reference Type:	External
Architecture:	SAR
Series:	--
Ratio - S/H:ADC:	1:1
Configuration:	S/H-ADC
Data Interface:	SPI
Input Type:	Single Ended
Number of Inputs:	1
Sampling Rate (Per Second):	45.5k
Number of Bits:	8
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADC)The TLC548IP is a high-performance monolithic 8-bit analog-to-digital converter (ADC) with an integrated 1.2V I2C interface. The converter is ideal for applications such as digital thermometers, humidity sensors, pressure sensors, and analog-to-digital converters. Additionally, the TLC548IP can measure analog signals from all types of digital devices. This ADC is composed of three main parts: a comparator, an automatic gain control (AGC) circuit, and an analog input protection circuit. The comparator has two inputs and operaes by comparing the two signals. The AGC circuit is responsible for adjusting the gain of the converter. The analog input protection circuit ensures the converter\'s accuracy and linearity by ensuring that no unwanted input signals are applied to the converter\'s input tip. The TLC548IP converter operates in two different modes – the single-ended mode and the differential input mode. In single-ended mode, the TLC548IP converts an incoming analog signal into a digital signal without any compensation or correction. The output resolution is 8-bit, and the device has an internal 1.2V I2C interface and a high-impedance input to allow for fast, precise conversions. In differential input mode, the TLC548IP comprises of two monolithic amplifiers that are connected to the same amplifier input node. These amplifiers are designed to convert the inputted analog signal into an 8-bit differential digital signal. This mode helps to eliminate any noise and distortion from the inputted analog signal. The TLC548IP also features an on-chip temperature compensation feature that ensures the conversion accuracy is not affected by the temperature variations. The TLC548IP can operate over a wide input voltage range of 1.2V to 5.6V. The maximum sampling rate of the converter is 500 Hz. This sampling rate can be further divided into smaller chunks depending on the application. Additionally, the TLC548IP has a low power consumption and can operate in a low voltage supply mode. The TLC548IP is highly compatible with a variety of common digital systems, such as I2C, SPI, UART, and CAN bus. Additionally, the device is programmable through a standard I2C interface. This allows developers to fine-tune the performance of the device in order to get the most out of it.Overall, the TLC548IP is an ideal analog-to-digital converter for applications requiring performance and accuracy. The integrated 1.2V I2C interface and high-impedance input make the TLC548IP ideal for digital thermometers, humidity sensors, pressure sensors, and analog-to-digital converters. The device is capable of measuring analog signals from all types of digital devices, and it operates over a wide voltage range. The TLC548IP also has a low power consumption, making it the perfect ADC for battery-operated applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description