TLE2064ACD

Voltage - Input Offset:	900µV
Base Part Number:	TLE2064A
Supplier Device Package:	14-SOIC
Package / Case:	14-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	0°C ~ 70°C
Voltage - Supply, Single/Dual (±):	7 V ~ 36 V, ±3.5 V ~ 18 V
Current - Output / Channel:	80mA
Current - Supply:	1.25mA
Series:	Excalibur™
Current - Input Bias:	4pA
Gain Bandwidth Product:	2MHz
Slew Rate:	3.4 V/µs
Output Type:	--
Number of Circuits:	4
Amplifier Type:	J-FET
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

The TLE2064ACD is a low-power operational amplifier from Texas Instruments. It is ideal for applications where low power dissipation is essential, such as medical systems, portable applications, and instrumentation. It has a wide common-mode voltage range that covers the entire supply voltage range, making it suitable for applications that require high-side or low-side sensing. Furthermore, the TLE2064ACD has excellent input parameters, high unity-gain bandwidth, and low distortion.

Working Principle

The TLE2064ACD is an integrated circuit consisting of two amplifiers. Each amplifier consists of five transistors, two resistors, and two capacitors. It is essentially a differential amplifier with an active load. The differential amplifier provides a high input impedance and high common-mode rejection ratio. The active load provides a low output impedance and low distortion.The TLE2064ACD operates in two basic configurations. The first configuration is as a conventional inverting amplifier. In this configuration, the inverting input is made active by applying a voltage to it, and the non-inverting input is connected to ground. This causes the output voltage to be the same as the voltage applied to the inverting input with the opposite polarity.The second configuration is as a non-inverting amplifier. In this configuration, the non-inverting input is made active by applying a voltage to it, and the inverting input is connected to ground. This causes the output voltage to be the same as the voltage applied to the non-inverting input with the same polarity.The TLE2064ACD is a very versatile amplifier that can be used for a variety of signal conditioning applications, such as amplification, buffering, offset control, and signal conditioning. It is also popular for medical and instrumentation applications due to its low power dissipation and excellent input parameters.

Applications

The TLE2064ACD can be used in a variety of signal conditioning applications. It is commonly used for Buffering, Input Offset Control, and Amplification.The TLE2064ACD is especially well suited for the buffering of high-impedance signals. It can effectively buffer signals in the range of 1mV to 3V, allowing the signal to be passed to the next stage of conditioning without loss of signal integrity. Furthermore, its low output impedance means that it will not draw current from the signal source.The TLE2064ACD is also useful for providing input offset control. It can be used to provide a neutral input to an amplifier, which makes it ideal for use in bridge-amplifier applications.The TLE2064ACD can also be used as an amplifier. In this application, it can be used to amplify weak signals or to present a high input impedance to the signal source. It has a wide unity-gain bandwidth and low distortion, making it ideal for use in high-end audio applications.The TLE2064ACD is also popular for medical and instrumentation applications. Its low power dissipation is ideal for portable and battery-powered instruments, and its wide common-mode voltage range makes it suitable for sensing applications.

Conclusion

The TLE2064ACD is an ideal low-power operational amplifier for applications where accuracy and low power dissipation are critical. It is a versatile amplifier that can be used for a variety of signal conditioning applications, such as buffering, offset control, and amplification. Additionally, its low output impedance and wide common-mode voltage range make it ideal for medical and instrumentation applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description