TLE2074ACNG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TLE2074ACNG4 is a monolithic dual channel low-noise opamp, which is an ideal choice for applications requiring low noise and good common-mode rejection, such as full bridge strain gauge amplifiers, load cell amplifiers, microphone preamplifiers, instrumentation amplifiers, and other high-performance amplifiers. It is designed for operation from a single supply voltage of 2.75V to 10V.

TLE2074ACNG4 belongs to linear, amplifiers, instrumentation, op amps, buffer amps. It features a wide input common-mode range (0.1V to VCC-1.3V), low offset voltage (5mV), low input bias current (3pA) and low noise (3.3nV/√Hz with a gain of 10). It also has low distortion (0.003%) and high slew rate (2.2V/us).

The TLE2074ACNG4 has two independent internally-compensated single-pole amplifiers, each with a wide gain range of unity to 1000. The el CMR (common-mode rejection) of 90dB ensures very low power supply interference, when the amplifier is being used in a wide variety of applications. The open loop gain of the amplifier is typically 80V/mV, with a guaranteed minimum of 60V/mV.

The working principle of the TLE2074ACNG4 is based on the basic principle of linear amplification. It uses two differential amplifiers—one for the visible range, and one for the non-visible range—to amplify the input signal. The amplifiers are designed to have large open-loop gain, wide bandwidth and low non-linear distortion, so that the signal is amplified to the required voltage level and its shape is preserved.

The TLE2074ACNG4 is constructed using a process called photolithography. This process involves patterning an IC using a positive and negative resist on a semiconductor substrate. The resist is made up of light-sensitive chemicals that when exposed to light, form patterns that can be used to etch the desired IC shapes. The IC is then exposed to an etch bath, which etches away the unwanted material and leaves the desired patterns. After the etch bath, the etched patterns are filled with a conductor, and the IC is sealed in an epoxy-like material to protect it from the elements.

The TLE2074ACNG4 is a very powerful dual op-amp and is used in a variety of applications, from medical instrumentation and network monitoring to audiovisual processing. Its low noise and high common-mode rejection make it an ideal choice for applications requiring high performance. It incorporates the latest semiconductor technology, making it highly efficient and reliable.

The specific data is subject to PDF, and the above content is for reference