TLE2141IDRG4

Voltage - Input Offset:	200µV
Base Part Number:	TLE2141
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 105°C
Voltage - Supply, Single/Dual (±):	4 V ~ 44 V, ±2 V ~ 22 V
Current - Output / Channel:	50mA
Current - Supply:	3.5mA
Series:	Excalibur™
Current - Input Bias:	700nA
Gain Bandwidth Product:	5.9MHz
Slew Rate:	45 V/µs
Output Type:	--
Number of Circuits:	1
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to TLE2141IDRG4

The TLE2141IDRG4 is a low power, wide dynamic range, current output linear amplifier, primarily built for instrumentation and sensor applications. It is used for amplifying low level current signals, ranging from DC to low frequency. This type of amplifier utilizes the same operational amplifier and current output stages. It can be used for several different applications such as amplifying current signals from sensors, current limited power supply control, and measuring load/current control in high impedance systems.

Features of TLE2141IDRG4

The TLE2141IDRG4 features a wide dynamic range and low current consumption. The operating temperature range of this amplifier is -40°C to +85°C, and the input voltage range is 0V to +14V. The maximum output current is 30mA, and the input offset current is 25nA. The TLE2141IDRG4 has a high open loop voltage gain of 60dB and can drive high current loads with a low voltage drop. The TLE2141IDRG4 also has a low power consumption of less than 3uA, which makes it suitable for applications where battery power is necessary. It also has low noise levels, which results in better performance in low signal level applications.

Applications of TLE2141IDRG4

The TLE2141IDRG4 is primarily used for instrumentation and sensor applications such as current-limited power supply control and current/load measurements. It can also be used for amplifying low level current signals for applications such as strain gauge circuits, thermocouples and piezo-resistive transducers.Furthermore, the TLE2141IDRG4 can be used in various medical devices such as medical implants, drug delivery systems and monitoring systems. It can also be used in automotive electronics like electronic control units, safety systems, and fuel systems.

Working Principle of TLE2141IDRG4

The TLE2141IDRG4 utilizes a current amplifier and an operational amplifier to process and amplify signals. The current amplifier is designed to convert a low level input signal into a larger output current. The operational amplifier, however, is designed to amplify the input voltage. The output current of the current amplifier is then processed further by the operational amplifier, resulting in a larger output voltage.The TLE2141IDRG4 is also capable of driving high current loads, with minimal voltage drop, due to its high input impedance and low output resistance. The amplifier is capable of operating from single supply voltages of ±3V and can provide output current levels up to 30mA.

Conclusion

The TLE2141IDRG4 is a low power, wide dynamic range current output linear amplifier, primarily intended for instrumentation and sensor applications. It is used for amplifying low level current signals, for applications such as strain gauge circuits, thermocouples and piezo-resistive transducers. This amplifier features a wide dynamic range, low current consumption and low noise levels, making it suitable for medical, automotive and instrumentation applications. It also has high open loop voltage gain and is capable of driving high current loads with a low voltage drop.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description