TLE4254GSXUMA2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Voltage Regulators - Linear

The TLE4254GSXUMA2 is a monolithic integrated DC/DC voltage regulator and is based on a linear topology operating at 2.5 and 5 V power supply. It uses negative zener diodes and current sink and source to control the output voltage. Such a regulator provides an output voltage up to 24 V and up to 1.5 A output current that is independent from the input voltage. Depending on the polarity of the current sink the output voltage of the regulator can be positive or a negative voltage.

The TLE4254GSXUMA2 is optimized to work in a broad range of applications, providing high efficiency. These applications include the powering of computers, embedded systems and motor control in automotive, industrial and consumer electronics. Additionally, it can be used in servers, printing machines, switch mode power supplies, battery chargers and chargers for consumer electronic devices, such as mobile phones, tablets, etc.

The device can be programmed to operate with a variety of functions, such as voltage trunking, soft start, output current limitation and frequency modulation. The external voltage and current programming can be done by connecting resistors across VSET and ISET pins. On the other hand, the output voltage and current can be monitored by connecting the pins OV and OC to a microcontroller for monitoring and control.

The main components of the TLE4254GSXUMA2 are its PMOS MOSFET, a low on-resistance N-Channel MOSFET, current limit comparators (passive voltage and current limit circuit) and an error amplifier. The PMOS MOSFET functions as the main control switch, switching the power rail between the power supply and the load according to the error amplifier output voltage, allowing current to flow in or out of the load. The current limit comparators detect when the current is too high and shut off the transistor, preventing the device from overloading.

The error amplifier is the main component of the TLE4254GSXUMA2, allowing the device to regulate the output voltage. It amplifies the difference between the voltage reference level at the VSET pin and the feedback voltage at the FB pin. Depending on the output voltage level, the output current of the error amplifier is adjusted to regulate the output voltage. The output voltage is kept at a steady level whenever the voltage reference is greater than the feedback voltage.

The TLE4254GSXUMA2 is designed with a wide range of protections and measures, such as over-voltage, over-temperature and short-circuit protection. In case a short occurs the output voltage is clamped to the VSET voltage, thus protecting the device and the load. Furthermore, the power-down mode ensures the device is disabled when the voltage at the VSET pin reaches 0 V.

Overall, the TLE4254GSXUMA2 is a highly efficient linear voltage regulator, providing precise output voltage regulation and current limiting to prevent the device from being overloaded. It offers excellent performance in a variety of applications, and it can be easily adapted to a wide range of operating conditions.

The specific data is subject to PDF, and the above content is for reference