TLP187(E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as optocouplers, are electronic components designed to separate and isolate circuits, allowing information to pass from one side to the other while keeping electric current separated. Among different types of optoisolators, TLP187 (E) is a photocoupler device containing a phototransistor. This phototransistor is optically coupled with an infrared emitting diode making it suitable for use in data transmission and logic interfacing.

The TLP187 (E) consists of two main components: an infrared light-emitting diode (LED) and a phototransistor output. The LED generates an infrared light signal when power is applied, and the phototransistor output detects the light and generates a low-level current. With a peak forward current of 120 mA, the LED can operate at a wide range of frequencies (up to 1MHz), making it possible to use TLP187 (E) for high-speed data transfer. The phototransistor output prevents any direct electrical connection between the input and the output, offering 1500V of photocoupler-rated isolation voltage.

The primary applications of the TLP187 (E) are in power supplies, automation instrumentation, and industrial control applications. It can be used to prevent unwanted electrical interference between two circuits, often from the power line. It can also be used for isolated signaling, current sensing, or logic interface, such as converting TTL levels into output signals. In addition, because of its low power consumption and high isolation, it is suitable for audio signal isolation in portable or battery-powered electronics.

The TLP187 (E) optoisolator\'s principle of operation is based on the principles of semiconductor photocell devices. When the LED is activated, it produces light, which is detected by the phototransistor output. The output current is proportional to the intensity of the light, allowing a current to flow through the phototransistor. This flow of current can then be used to drive a circuit or a signal.

In summary, the TLP187 (E) optoisolator is an ideal solution for isolated signal transfer, logic interface, and data transmission. By using an LED and phototransistor to generate and detect a light signal, respectively, it can provide high speed, low power, and high isolation between two circuits. Additionally, it can be used in a variety of applications, such as in industrial automation and controls, audio signal isolation, and power supplies, making it a versatile and reliable optoisolator.

The specific data is subject to PDF, and the above content is for reference