TLP291(GR-TP,E)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, commonly known as optocouplers, are electronic components used to isolate two circuits from each other. Optoisolators provide galvanic isolation, which prevents electrical noise from reaching a sensitive component or circuit. The TLP291(GR-TP,E) is a type of optoisolator that uses a photovoltaic output to isolate its two sets of signals. The TLP291 is used for various applications, most notably in signal transmission and overload protection.

The TLP291 is a general-purpose, dual-channel optoisolator with a photovoltaic output and two separate signal outputs. It features a high maximum transistor output current of 500mA and a low saturation voltage. The optoisolator is capable of operating at high voltages up to 24 Vdc and is designed for use in DC to DC converters. The TLP291 also has built-in surge clamping diodes and a fast response time to protect against overvoltage and inductive loads.

The main components of the TLP291 are the LED, photodetector, signal transistor, and clamping diode. The LED emits two signals, one for each of the two channels. The incoming signal is amplified by the photodetector, which then drives the signal transistor. The output of the signal transistor is then clamped by the diode, preventing the voltage from going above a certain limit. The signal output of the transistor is then sent to the other circuit.

The TLP291 can be used in various applications. Its isolation capability makes it ideal for interfacing different voltages, as well as for isolating sensitive electronics from undesired noise. Its surge clamping diodes and fast response time make it an attractive solution for overload protection in various signal transmission applications. The TLP291 can also be used in DC to DC converters, where it serves as a switch for converting between different voltages.

In conclusion, the TLP291(GR-TP,E) is a general-purpose, dual-channel optoisolator with a photovoltaic output and two separate signal outputs. It features a high maximum transistor output current of 500mA and a low saturation voltage, and is capable of operating at high voltages up to 24 Vdc. The TLP291 is used for various applications, most notably in signal transmission and overload protection. Its features make it an attractive solution for DC to DC converters. It also provides galvanic isolation, which is essential for isolating sensitive electronics from undesired noise.

The specific data is subject to PDF, and the above content is for reference