TLP748J(F)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electrical components designed to isolate high voltage electrical circuits from low voltage circuits. They provide galvanic isolation to suppress high voltage transients and minimize electrical noise from propagating to other parts of the system. The TLP748J(F) is a type of optoisolator (also known as an optocoupler or photocoupler) that is specifically designed to control the output voltage of a triac or scr (silicon controlled rectifier). This article will discuss the applications and working principle of the TLP748J(F).

The TLP748J(F) is used in a variety of applications, such as motor speed control, lighting and heating control, current sensing, AC power switching, and AC phase control. It is also used to provide voltage isolation between mains and low-voltage circuit as required by electrical safety standards. It can be used to switch circuits with voltages up to 600 VAC or 800 VDC. Because it is a bidirectional device, it can be used to control both AC and DC signals. The device is also insulated from the input signal, making it suitable for applications in which ground noise or common-mode transients need to be suppressed.

The TLP748J(F) is a photocoupler that consists of an infrared LED with an integrated detector. The LED emits light when an electrical signal is applied to its anode and the detector detects the light when present. The detector then switches the output on or off depending on the input voltage. This makes the TLP748J(F) an optically isolated triac or scr driver. There is also an optional integrated zener diode to provide protection from overvoltage and the device is encapsulated with a solderable plastic package.

The working principle of the TLP748J(F) is based on the basic principle of optical isolation. When an electrical signal is applied to the anode of the LED, the LED emits light which is then detected by the integrated detector. The detector then triggers the triac or scr and switches it on or off depending on the voltage level. The LED and the detector are designed to have isolation voltage up to 5kVrms, making the device suitable for use in high-voltage applications.

The TLP748J(F) has a forward voltage drop of 1.5V and can be used to switch both AC and DC signals. The device can handle peak forward currents up to 150mA, making it capable of controlling high-power electrical circuits. The device also has a high dielectric strength of 5kVrms, which allows it to effectively suppress common-mode transients.

The TLP748J(F) has a wide range of application. It can be used for motor speed control, lighting and heating control, current sensing, AC power switching, and AC phase control. The device can also be used to provide voltage isolation between mains and low-voltage circuits, and to protect circuit from overvoltage. The device is also insulated from the input signal, making it suitable for applications in which ground noise or common-mode transients need to be suppressed. The device\'s high dielectric strength and wide operating voltage range make it ideal for a variety of high-voltage applications.

The specific data is subject to PDF, and the above content is for reference