TM1062DUA

Series:	Copperhead™
Part Status:	Active
Type:	Transceiver
Protocol:	IEEE 1394B
Number of Drivers/Receivers:	1/1
Duplex:	--
Data Rate:	1.062Gbps
Voltage - Supply:	5V
Operating Temperature:	-55°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	28-SMD Module
Supplier Device Package:	Module

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TM1062DUA Application Field and Working Principle

Introduction

TM1062DUA is a receiver module designed by Texas Instruments. The module is available in commercial, industrial and automotive temperature ranges, and meets automotive electronic system requirements such as AEC-Q1002 and ISO7637. This receiver module is designed to provide reliable and low power solutions in a wide range of automotive system applications.

Application Fields

TM1062DUA offers high performance in automotive applications such as automotive gateways, automotive gate hubs, and automotive body electronics. It is suitable for a variety of different applications where low power solutions and reliability is the prime consideration.TM1062DUA can be used in high-frequency applications such as CAN, CANFD, and FlexRay. It is also suitable for low frequency applications, including Address Bus, LIN/J2602, Keyword Protocol 2000/ISO14230, and Ethernet. The TM1062DUA also supports high-speed serial communication protocols like USB, UART, and SPI for automotive applications such as gateways, instrument clusters, IPS, and engine controllers.

Pinout

The TM1062DUA has 32-pins with multiple interfaces, including CAN, FlexRay, LIN/J2602, Keyword Protocol 2000/ISO14230, and Ethernet. The GND pin provides ground reference and is used to connect the TM1062DUA module to the ground of other circuit modules. The EN pin enables and disables the module. The CLK pin is used to supply the clock. The WAKE pin is used to activate the wake-up and reset functions. The HEN pin is used to enable the hot enable functions. The LED and LEDA pins are used for LED indicators. The RXD, RXD+, RXD- pins are used for the serial receiver. The TXD and TXD+ pins are used for the serial transmitter. The RX, RX+, and RX- pins are used to receive data and the TX, TX+, and TX- pins are used to transmit data.

Working Principle

TM1062DUA is designed to provide reliable and low power solutions in a wide range of automotive applications. It is built on advanced technology that supports certain features such as low power standby, low power wake-up, high noise immunity, hot enable mode, PLL lock protection and serial errors detection. TM1062DUA provides an integrated CAN transceiver and an integrated FlexRay transceiver with low-power standby and wake-up, low-power communication interface, high noise immunity, hot enable mode, and PLL lock protection. This allows for a high-speed, long-distance communication solution for automotive applications.The TM1062DUA module also supports the Keyword Protocol 2000/ISO14230 protocol, which is designed to ensure fast, secure, and reliable communication between devices. The TM1062DUA module also supports the Ethernet protocol, which is used to connect multiple devices over a single network. The TM1062DUA module also provides a serial processor with several on-chip peripherals such as UART, SPI, and I2C to ensure an optimum performance. The serial processor also integrates several digital signal processors to perform signal control, process alarms, and execute different operations.

Summary

To summarize, TM1062DUA is a receiver module designed by Texas Instruments to provide reliable and low power solutions in a wide range of automotive applications. It supports a variety of different communication protocols, such as CAN, FlexRay, LIN/J2602, Keyword Protocol 2000/ISO14230 and Ethernet. It has an integrated CAN transceiver and an integrated FlexRay transceiver with low-power standby and wake-up, low-power communication interface, hot enable mode, and PLL lock protection. The module also provides a serial processor with several on-chip peripherals such as UART, SPI and I2C to maintain a high performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description