TMS320F280260DAS

Program Memory Type:	FLASH
Base Part Number:	TMS320F280260
Supplier Device Package:	38-TSSOP
Package / Case:	38-TSSOP (0.240", 6.10mm Width)
Operating Temperature:	-40°C ~ 125°C (TA)
Oscillator Type:	Internal
Data Converters:	A/D 6x12b
Voltage - Supply (Vcc/Vdd):	1.71 V ~ 1.995 V
RAM Size:	3K x 16
EEPROM Size:	--
Series:	C2000™ C28x Piccolo™
Program Memory Size:	16KB (8K x 16)
Number of I/O:	20
Peripherals:	Brown-out Detect/Reset, POR, PWM, WDT
Connectivity:	I²C, SCI, SPI, UART/USART
Speed:	50MHz
Core Size:	32-Bit
Core Processor:	C28x
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TMS320F280260DAS is a device of digital signal processor (DSP) used in every embedded application. This device is designed with a powerful on-chip memory and a voltage range extended to 3.3 volts. As a result, it has become one of the most widely used devices in embedded applications.The TMS320F280260DAS has a long list of features including two memories, a 32-bit address memory, two 32-bit data memories, and two 8-bit data memories. It also features two analog-to-digital converters, four programmable timers, three serial ports, and up to four DMA channels and six PIO channels. The device has an included silicon autorouting feature to make board layout and system routing easier. Additionally, it supports multiple power modes and several peripheral functions like JTAG debugging and monitoring, CPU cycle measurement and stopwatch, and kernel debugging.The working principle of the TMS320F280260DAS goes something like this: Upon power up, the device is activated. This causes the processor to run in "stop mode," during which no instructions are executed. Once the device sees a valid reset signal, it begins executing instructions to a pre-determined application/kernel in memory. This application/kernel is usually customized to a customer\'s specific requirements and can be programmed using the appropriate development tool.During executing instructions, the device works with different peripherals to process or interface with input or output signals. This peripheral set may vary depending on the system design, but usually comprise of sensors, cameras, LED displays, LCDs, motors and relays, etc. To process these inputs, the on-chip ADC converts signals to digital form, while the digital signal processor (DSP) executes the required instructions. Additionally, the device possesses interrupts to handle external events, and one or more power management techniques to enter low-power states when applicable.In short, the TMS320F280260DAS is a highly versatile device for embedded applications. It includes a full range of features and is supported by several development tools for programming and debugging. It is very suitable for embedded design projects that require analog-to-digital conversion, signal processing, or control signals interfacing. It also offers high performance and low power consumption, making it an excellent choice for a wide range of embedded systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description