TN5015H-6G-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are a type of semiconductor device commonly referred to as a "switch." They are used to control the flow of electricity by switching between ON and OFF states. Thyristors can be categorized into two main types: SCRs (Silicon Controlled Rectifiers) and TRIACs (Triode for Alternating Current). The TN5015H-6G-TR is an SCR (Silicon Controlled Rectifier) with a maximum forward current rating of 1.5A. The TN5015H-6G-TR is a four-layer semiconductor device consisting of a N-type semiconductor, anode (positive) region, gate (control) region, and a cathode (negative) region.

The TN5015H-6G-TR is typically used in power management applications such as voltage regulation, power conversion and control, and inverter applications. In these applications the TN5015H-6G-TR is used to switch power on and off, regulate current levels, or to control the timing of an operation. In voltage regulation applications the TN5015H-6G-TR can be used in place of a mechanical relay as it is more reliable and has a much faster response time.

The TN5015H-6G-TR operates on a principle of four layer “injection-charge-hold”.When a voltage greater than the control threshold value is applied to the gate terminal, the device enters the conductive state and a current can pass from the anode through the N-type semiconductor to the cathode. This is known as the “injection-charge” phase. After the current is injected, the device will remain in the conductive state, even when the voltage at the gate terminal is removed. This is known as the “hold” phase. To turn the device off, a negative voltage must be applied to the gate terminal which causes the device to enter the nonconductive state. This process is known as “reverse-charge-cut-off”.

The TN5015H-6G-TR can be used in a variety of applications such as power control systems, power supplies, battery chargers, inverters, motor controls and DC-AC conversion. It can also be used in applications such as lighting control, phase control, and static power switching. The TN5015H-6G-TR is suitable for switching line voltages up to 100V, as well as low voltage (5-20V) circuit applications.

The TN5015H-6G-TR is a robust device that is designed to withstand high voltage, high temperature, and high current applications. It can be used in both linear and switching mode operation. The device is also designed to be used in applications that require a high surge capability. The device is fully RoHS compliant and has an operating temperature range of -55°C to +125°C.

The TN5015H-6G-TR is a versatile SCR that is used to switch currents and voltages in various applications. It is designed to be reliable and efficient, and is suitable for high voltage, high temperature, and high surge applications. The device is RoHS compliant and can operate over a wide temperature range. With its fast response time and reliable operation, the TN5015H-6G-TR is a great choice for any power management application.

The specific data is subject to PDF, and the above content is for reference