TOOLSTICK330DPP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ToolStick 330DPP is a versatile evaluation board that can be used for a wide range of embedded applications. It is based on a Cortex-M3 processor core, along with external RAM and Flash memory. The board also includes a Direct Memory Access (DMA) controller, and dual 10/100 Ethernet interfaces.

The ToolStick 330DPP is designed for use with embedded systems that require high performance I/O and communication capabilities. It can be used for applications such as industrial controls, automotive systems, medical systems, communications systems, audio/video systems, and so on. It is ideal for those who need to quickly and easily develop applications that require high speed and multiple I/O interfaces.

The Cortex-M3 core is the heart of the ToolStick 330DPP and drives all the features of the board. It includes an ARMv7-A instruction set architecture, a large memory system, and a comprehensive set of peripherals. The Cortex-M3 processor is designed to make use of the tight processing requirements of modern embedded systems and help designers easily achieve their highest performance goals.

The board also includes flash memory, and SRAM, along with a 10/100 Ethernet controller with two separate channels for increased speed. The board also features an SD/MMC card slot, as well as several external peripherals such as an I2C Bus, UART, and USB interface. The board also includes a direct memory access (DMA) controller, which enables designers to rapidly and easily transfer data from the external memory to the processor.

To make use of the board, designers need to provide a set of firmware programmable through the ToolStick 330DPP compiler and development system. This includes real-time operating system support such as RTX-C, as well as middleware layers such as USB, TCP/IP, and other communications stacks. In addition, the devkit also includes a comprehensive IDE enabling rapid development of embedded applications.

The ToolStick 330DPP can be used with the Cortex-M3 processor having Clock frequencies of up to 72 MHz. It can perform 32-bit operations in single cycle. The feature set of the board include serial ports, I2C, USB, Ethernet, and DMA controllers. The board also includes an SD/MMC card slot and up to 2GB of external Flash memory.

The ToolStick 330DPP board also supports systems running Linux, as well as other operating systems. The board can also support real-time operating systems such as RTX-C and middleware layers including USB, TCP/IP, and other communications stacks, providing system designers a complete development environment.

The working principle of the board is quite simple. It includes a processor, Flash memory and SRAM, a 10/100 Ethernet controller plus two external channels, and other I/O peripherals, such as an I2C bus. The board then runs software written in the ToolStick 330DPP compiler or development system, and the firmware programmable in this environment controls the hardware and performs the desired tasks. This board can be used in a multitude of applications, ranging from consumer electronics and automotive systems to medical systems.

In conclusion, the ToolStick 330DPP is a versatile MCU/DSP evaluation board that can be used for a wide range of industrial applications. It is based on an ARM Cortex-M3 processor core with external flash memory, and SRAM. The board also includes a direct memory access (DMA) controller, plus 10/100 Ethernet interfaces, and can be used to quickly and easily develop applications that require high speed and multiple I/O interfaces.

The specific data is subject to PDF, and the above content is for reference