TPD1E10B06DYAR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Description

The TPD1E10B06 is a single-channel ESD TVS diode in a small 0402 package convenient for space constrained applications and an industry standard SOD-523 package. This TVS protection product offers ±30kV contact ESD, ±30kV IEC air-gap protection, and has an ESD clamp circuit with a back-to-back TVS diode for bipolar or bidirectional signal support. The 12pF line capacitance of this ESD protection diode is an excellent choice for a wide range of applications supporting data rates up to 400Mbps. Typical applications of this ESD protection product are circuit protection for audio lines (microphone, earphone, and speakerphone), SD interfacing, keypad or other buttons, VBUS pin and ID pin of USB ports, and general-purpose I/O ports. This ESD clamp is good for the protection of end equipment like portable devices, wearables, set-top boxes, electronic point-ofsale equipment, appliances, and products for building automation.

Features

   1. Provides system-level ESD protection for lowvoltage I/O interface

   2. IEC 61000-4-2 level 4 ESD protection

       – ±30kV contact discharge

       – ±30kV air-gap discharge

   3. IEC 61000-4-5 surge: 6A (8/20µs)

   4. I/O capacitance 12pF (typical)

   5. RDYN 0.4Ω (typical)

   6. DC breakdown voltage ±6V (minimum)

   7. Ultralow leakage current 100nA (maximum)

   8. 10V clamping voltage (maximum at IPP = 1A)

   9. Industrial temperature range: –40°C to 125°C

Applications

   1. End equipment:

       – Portable devices

       – Wearables

       – Set-top boxes

       – Electronic point of sale (EPOS)

       – Appliances

       – Building automation

   2. Interfaces:

       – Audio lines

       – Push-buttons

       – General-purpose input or output (GPIO)

Package information

   1. Package model: SOT-563 (6 pins)

   2. Size: 1.6mm × 1.2mm × 0.6mm (ultra-small size, suitable for high-density PCB layout)

   3. Pin configuration:

       - Pin 1: Anode (protection line side)

       - Pin 2: Cathode (ground side)

       - Other pins: NC (not connected)

Electrical parameters

The specific data is subject to PDF, and the above content is for reference