TPDV1225RG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are solid-state devices with three layers of semiconductor material, each layer being an alternating P and N type material, sandwiched together in an IGBT configuration. Each alternating layer of P and N type material together with a third terminal forms a thyristor. TRIAC’s, or “Thyristor Rectified Alternating Current” are one type of thyristor. These devices are used to control power in circuits. The TPDV1225RG is an example of a European Standard TRIAC, with the maximum current rating of 12A, and the maximum voltage rating of 600V AC.

A TPDV1225RG can be used in a variety of circuits and applications. It is used to control power in circuits, such as in lighting circuits, motor control circuits, and power supply circuits. Additionally, they can be used in HVAC (Heating, Ventilation, and Air Conditioning) control circuits and are also suitable for switching applications, such as in light dimmers. They are also well suited for use in both industrial and consumer electronic circuit applications.

The working principle of the TPDV1225RG is based on the internal thyristor structure. The conductive gate terminal is used to turn the TRIAC “ON” when power is applied. When power is removed, the TRIAC remains “ON” in its holding state, due to its latching properties. The TPDV1225RG is then able to be “Triggered” or restarted when voltage is reapplied to the gate terminal.

In addition to the gate trigger, the TPDV1225RG has two other terminals which are referred to as MT1 and MT2. These are the terminal outputs from the TRIAC and are connected to the load. The direction of the flow of current is determined by the polarity of the MT2 terminal at the time of the gate trigger.

When power is applied to the TPDV1225RG, through either the MT1 or MT2 terminals, the TRAC turns “ON” in forward block mode, allowing current to flow through both of the MT1 and MT2 terminals in a forward direction. The current will then continue to flow in the same direction, until the power is removed. Once the power is removed and then reapplied, the trigger can be set by activating the gate voltage, thereby switching on and off the power again.

The TPDV1225RG is a popular choice for applications and circuits that require an electronic switching device with a high current rating and a low voltage drop across the device. It is a simple and reliable device which is used in a wide range of circuits, such as motor control circuits, lighting circuits, HVAC control circuits, and power supply circuits.

The specific data is subject to PDF, and the above content is for reference