TPS2022DG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TPS2022DG4 is an advanced system supervisor used for power supplies in the PMIC (Power Management IC) category.

It is a PMIC load driver and distribution switch for controlling the power to multiple channels in systems. The TPS2022DG4 is used for building systems with multiple power rails, each with its own control, for powering peripherals like USB, LVDS, SD, UARTS, DMA, and other I/O devices.

The device comprises of two switches with low RDS(ON), high-side, and low-side load drivers. The load driver is responsible for driving the output voltage levels of the power rail and boosting the current drive capability of the output rail. It also features a standby controller that monitors the system power state and shuts off the switches when power is not required, enabling system-level power savings.

In applications where multiple power planes are required for different peripherals connectors, the TPS2022DG4 is used to match supply voltages across the different planes. With the TPS2022DG4, the design engineer has the ability to discretely control each power rail independently and apply voltage ramp-up/down profiles to optimize the power up/down sequence. This allows the designer to robustly control the power-up and power-down sequences during system initialization and shut-down.

The power signal connections are primarily divided into four groups. These groups are connected to the PWRON signal, VIN, OUTPUT, and EN. PWRON signal is a signal generated by the system controller and is used to initiate power up and power down sequences. It basically tells the TPS2022DG4 when to turn on and turn off transmitters.

VIN signal is used to supply power to the different power rails of the power distribution switch. The OUTPUT signal is used to supply power to the load drivers of the load switch. Finally, the EN signal used to enable or disable the switches.

The TPS2022DG4 is a very useful power management IC for applications where system power power consumption needs to be monitored and managed. Not only does it provide the load drivers to boost current drive capability, but it also provides the ability to monitor the power state of the system.

The TPS2022DG4 is an ideal device for applications where multiple power planes are needed to drive different peripherals connectors. With the TPS2022DG4, the design engineer can discretely control each power rail independently, as well as apply voltage ramp-up/down profiles to optimize the power up/down sequence. This makes it convenient and highly efficient for controlling system power levels.

The specific data is subject to PDF, and the above content is for reference