TPS2024P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TPS2024P, a power management and distribution chip from Texas Instruments, is an important component of the Power Management, Interface, and Safety (PMIS) family of low power integrated circuits. It is often used as a power switch, load driver, and current detector in power distribution systems. It is capable of providing precise control of current and voltage, as well as monitoring and protecting against over-voltage, under-voltage and overload.

The TPS2024P is a 1.25 x 9.5 mm power distribution switch, with a maximum output current of 5A, and a maximum voltage of 5V. It is usually used to control the on/off and/or current levels of power supplies in small systems, such as personal computers, consumer electronics, and automotive applications. The TPS2024P offers a variety of features, such as a power-on reset, programmable voltage and current thresholds, hysteresis for both over-current and over-voltage protection, and programmable control pins for CLK and DIMM control. It also includes an internal thermal protection system and heartbeat indicator.

The TPS2024P uses the Voltage Detect and Protection (VDP) architecture to ensure fast response and reliable protection. The VDP is a two-stage voltage monitoring architecture, which uses two comparators to sense two voltage levels, providing over and under voltage protection, as well as dynamic voltage monitoring. The VDP monitors the dynamic voltage level through a timing capacitor, which controls the reset time for the action state of the comparator and the reset time for the latch.

The TPS2024P is also capable of providing current detection and protection. It comes with an internal current monitor, which can detect and limit an over-current event. It can also be configured to limit the current level by using an external sense resistor. The TPS2024P includes a Peak Current Mode (PCM) architecture, which uses a hysteretic comparator and a timing capacitor to limit the peak current. The internal sense pins can also be used to detect and limit the peak current.

The TPS2024P is also equipped with a over-temperature protection feature. It can detect a high temperature event, disable all outputs and activate a reset signal, ensuring that the power management system stays in a safe state during an over-temperature event. The device also supports external clock pulse generation, allowing the system to be synchronized to the power supply.

In conclusion, the TPS2024P is an important component in power distribution systems. It is capable of providing precise control of current and voltage, as well as monitoring and protecting against over-voltage, under-voltage and overload. It also includes a variety of features, such as power-on reset, programmable voltage and current thresholds, hysteresis for both over-current and over-voltage protection, and programmable control pins for CLK and DIMM control. Its capacity for current detection and protection, as well as its support for pulse generator makes it a very useful component for designing power management systems.

The specific data is subject to PDF, and the above content is for reference