TPS2043ADR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TPS2043ADR voltage protection switch is a programmable device specifically intended to provide fault protection and minimize in-rush current to sensitive components. In battery-operated and high-voltage applications, it limits inrush currents when switching capacitive loads. It is part of a category of general purpose Power Management Integrated Circuits (PMICs), specifically Power Distribution Switches, Load Drivers and Voltage Regulators.

The device ensures that system power is applied in a controlled manner while breaking a short circuit condition. It is capable of operating within a wide voltage range, from 4.5V to 40V, and can operate at temperatures from -40 to 125°C.

The TPS2043ADR provides a single output, with a programmable current-limiting threshold. It is designed for use in a variety of applications, including battery-powered systems, personal computer/server power supplies, charging systems, as well as in automotive and industrial applications.

In its simplest form, the TPS2043ADR voltage protection switch consists of five basic components:

• Voltage Control Circuit – This circuit is configured to monitor the voltage at the points where it is connected, and to provide the control signal for the switch to the output latch.
• Output Latch – This latch is configured to open or close the switch in response to voltage control signals from the voltage control circuit.
• Current Limit Circuit – This circuit is configured to limit the output current when the device is switched on or off.
• Fault Detection Circuit – This circuit is configured to detect and report faults such as over-current, over-voltage, under-voltage, and short circuit conditions.
• MOSFET High Side Switch – This switch is located between the input and output terminals of the device and can be closed or opened by the output latch.

The TPS2043ADR is typically used to protect sensitive devices against short-circuits, over-voltage, under-voltage, and excessive current when switching on large capacitive loads. It is typically applied in battery-operated systems, digital power supplies, video power supplies, and automotive systems.

When used as a switch, with one of its terminals connected to the load, the device switches on in response to a signal at its voltage control input. During normal operation, the signal voltage is maintained above the switch-on threshold, thus allowing the load to remain connected to the power source until the control signal is removed.

The current limit circuit of the device is designed to limit the output current when the switch is turned on or off. This feature helps protect the system from over-current conditions which can occur during power up or when the load is connected. The fault detection circuit is configured to detect and report any over-voltage, under-voltage, or over-current conditions.

In summary, the TPS2043ADR is a programmable voltage protection switch specifically intended to provide fault protection and minimize in-rush current to sensitive components. It is part of a category of general purpose Power Management ICs, specifically Power Distribution Switches, Load Drivers, and Voltage Regulators. It is typically used to protect sensitive devices against short-circuits, over-voltage, under-voltage, and excessive current when switching on large capacitive loads.

The specific data is subject to PDF, and the above content is for reference