TPS2053DRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Power Distribution Switches, Load Drivers, focus on the TPS2053DRG4 application field and working principle.

Introduction

The TPS2053DRG4 is a single-channel, two-state power switch and low-side load driver that are optimally suited for motor control applications, as it enables efficient power distribution, integrated protection measures, and provides advanced diagnostic and control features. The switch is capable of controlling up to 4A of continuous current, and can easily handle high transient currents of up to 10A. It can also support up to a 16V supply voltage, enabling the user to control high power circuits.

Features

The TPS2053DRG4 has several features that make it perfect for motor control applications. One of the key features is the integrated current sense amplifier which can measure the current flowing through the switch, and report back to the host processor with a highly accurate current reading. This allows the system to detect any overcurrent conditions and take appropriate measures to protect the system. In addition, the current sense amplifier can be used to detect stalled motors, and either disable or re-enable the power to the motor accordingly.

The TPS2053DRG4 also includes a voltage underestimation detector which monitors the voltage of the power supply, ensuring that the system does not pull too much current, which could possibly damage the system. It is also equipped with a slew-rate controlled gate drive, which enables efficient switching of the power supply, while reducing electromagnetic interference (EMI).

Another key feature of the TPS2053DRG4 is the integrated fault reporting capability, which allows the system to identify and report any errors or faults that might occur during the operation of the motor. This assists in troubleshooting and fault isolation, and can be used to extend the lifetime of the system.

Applications

The TPS2053DRG4 is ideally suited for motor control applications such as automotive starter/starter motors, electric window lifts, and window wipers. It provides an efficient way to control the power distribution to these types of motors, while also providing integrated protection measures to guard against potential damage. In addition, its integrated fault reporting capability assists in troubleshooting and fault isolation in the event of a malfunction.

Working Principle

The TPS2053DRG4 consists of two state power switch components, the high side P-channel MOSFET and the low side N-channel MOSFET. When the input signal is HIGH, the N-channel MOSFET is turned ON and current flows from the source to the drain, which is connected to the load. This enables power to be supplied to the load, and the load can be controlled by adjusting the source voltage.

On the other hand, when the input signal is LOW, the P-channel MOSFET is turned ON, and current flows from the drain to the source, which is connected to ground, disabling the power to the load. This allows the TPS2053DRG4 to be used as a power switch, enabling either on/off or PWM control of the load.

The TPS2053DRG4 is also equipped with a current sense amplifier, which reads the voltage across the current sense resistor, and sends this information back to the host processor. This allows the system to detect any overcurrent conditions and take appropriate measures to protect the system.

Conclusion

The TPS2053DRG4 is a single-channel, two-state power switch and low-side load driver that are optimally suited for motor control applications. It enables efficient power distribution, integrated protection measures, and offers advanced diagnostic and control features such as the current sense amplifier, voltage underestimation detector, and slew-rate controlled gate drive. This makes the TPS2053DRG4 perfect for automotive starter/starter motors, electric window lifts, and window wipers.

The specific data is subject to PDF, and the above content is for reference