TPS2060DGN

Voltage - Supply (Vcc/Vdd):	Not Required
Base Part Number:	TPS2060
Supplier Device Package:	8-MSOP-PowerPad
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Operating Temperature:	0°C ~ 105°C (TJ)
Fault Protection:	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Features:	Status Flag
Input Type:	Non-Inverting
Rds On (Typ):	70 mOhm
Current - Output (Max):	1.5A
Series:	--
Voltage - Load:	2.7 V ~ 5.5 V
Interface:	On/Off
Output Type:	N-Channel
Output Configuration:	High Side
Ratio - Input:Output:	1:2
Number of Outputs:	2
Switch Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of PMIC - Power Distribution Switches, Load Drivers

Power Management Integrated Circuits (PMICs) are integrated circuits that are used to manage the power consumption of electronic devices by regulating the current, voltage and temperature of the device to optimize its operation. These devices are mostly used in embedded electronics, consumer electronics and mobile devices.PMICs come in a variety of form factors, such as integrated circuits (ICs) and discrete components. The main type of PMICs are power distribution switches, load drivers and voltage regulators.

TPS2060DGN application field and working principle

The TPS2060DGN is a dual-channel power distribution switch that provides logic-controlled power to each of its two output channels. It can be used to control power distribution to different load circuits in any system that requires a low-voltage power distribution.The TPS2060DGN uses two n-channel enhancement-mode MOSFETs as its power switches. The top MOSFET turns on when the gate receives an active-low signal, while the bottom MOSFET turns off when the gate receives an active-high signal. A logic control pin is used to control the gate signals.The maximum output current of the TPS2060DGN is rated at 2A. It can operate at input voltages from 2.7V to 12V and output voltages from 2.7V to 7V. Its load switch on-resistance is typically less than 25 mΩ, which ensures high efficiency in power management.The TPS2060DGN has built-in preventative measures to protect the device from over-current and over-temperature faults. It has a thermal shutdown feature wherein the device shuts down automatically when the temperature goes above the maximum specified temperature. It also has an over-current shutdown feature which shuts down the device when the output current exceeds the nominated value.The TPS2060DGN can be used in applications such as microcontrollers, motor control, battery protection and power management. It is cost-effective and also has a wide temperature specification, which makes it suitable for a variety of environmental conditions.When designing with this device, it is important to keep the input capacitance between 150 pF and 1 μF, while using a minimum of two output capacitors, ranging from 10 μF to 47 μF, between the drain and source pins to minimize voltage transients.

Conclusion

The TPS2060DGN is a dual-channel power distribution switch that provides logic-controlled power to each of its two output channels and is suitable for a wide variety of applications. It has a low on-resistance and built-in safety features to protect the device from over-current and over-temperature faults, making it an ideal choice for power management applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description