TPS2069CDGNR-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TPS2069CDGNR-2 is a power-management integrated circuit (PMIC) used as a power distribution switch, load driver, or data switch. It is designed to be used in applications ranging from portable handheld electronics to enterprise computing. The device offers low-current-draw active power control, logic-level up/down switches, load driving capability, and data routing.

The device is designed with a maximum power rating of 500 mw and a voltage supply operating range of 2V to 5.5V. It features two individually configurable channels, which can be used as power switches or data switches, each capable of driving loads up to 250 mA. The device also includes a wide range of protection features, including ESD protection, over-voltage protection, under-voltage protection, overload protection, and short circuit protection. All features are rated over temperature and humidity conditions.

The main feature of the TPS2069CDGNR-2 is its ability to control power or data transfer while keeping the current draw low. It has a low quiescent current draw typical of 0.5 μA over temperature and no more than 3 μA over humidity with all functions enabled. This allows the device to operate in portable and battery-powered systems for long periods without significant battery drain.

Two channels of the TPS2069CDGNR-2 can be used for power switching for multiple functions such as switching power paths, driving loads, and routing data. The two channels have independent input selectors that allow each channel to be independently controlled by either of two inputs. The device also has a power on reset feature that monitors the status of the channel\'s inputs as well as a power-good output that indicates when the inputs and outputs of both channels are in a valid logic level state.

The devices two channels can also be used as load drivers and data switches. When communicating with a microcontroller or any other digital device, the two channels can be used as switches to route data and as drivers for loads up to 250 mA. Each channel also has a slew rate control to set the rate at which the channel transits from one logic state to another. The device also offers a logic level shifter to convert voltages from a higher to a lower logic level.

The device\'s two independent input selectors can be used to choose voltage and current sources, or combine the two. The device can be used to switch between two sources of power and current, or to provide power or signal control to a load. The device also has adjustable current limiting and over-current protection, so it can be used safely with a wide variety of loads. The device is also designed to operate in a wide range of temperatures and humidity conditions.

The TPS2069CDGNR-2 has a variety of features that make it an excellent choice for a wide range of power management and data routing applications. It is designed with power and current management, logic level switching, and load driving capability, and it is designed to operate over a wide range of temperatures and humidity conditions. This makes it a perfect choice for power-management applications where low current draw is a necessary requirement.

The specific data is subject to PDF, and the above content is for reference