TPS2211IDBG4

Voltage - Supply (Vcc/Vdd):	Not Required
Base Part Number:	TPS2211
Supplier Device Package:	16-SSOP
Package / Case:	16-SSOP (0.209", 5.30mm Width)
Operating Temperature:	-40°C ~ 85°C (TA)
Fault Protection:	Current Limiting (Fixed), Over Temperature
Features:	Status Flag
Input Type:	--
Rds On (Typ):	50 mOhm
Current - Output (Max):	1A
Series:	--
Voltage - Load:	3.3V, 5V, 12V
Interface:	Parallel
Output Type:	--
Output Configuration:	High Side
Ratio - Input:Output:	3:2
Number of Outputs:	2
Switch Type:	PCMCIA Switch
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TPS2211IDBG4 is a power management integrated circuit (PMIC) from Texas Instruments. It is a Power Distribution Switch, Load Driver that helps manage power to your electronics. This device controls the power to multiple sources, by accepting a power input for distribution. It also offers various features to support multiple power supplies and adjustable voltage levels.The TPS2211IDBG4 uses P-channels and N-channels switched and isolated outputs to provide power to different loads, such as microcontrollers, CPUs, ASICs, FPGAs and power amplifiers. This device features two independent power switches, each with a separate enable line. These switches are used to isolate power between different components of the system, such as the USB power switch, battery charger, and more. The output voltage range is 3.3V to 24V, which is adjustable through the externally connected sense resistors.The TPS2211IDBG4 offers fast turn-on/off time and low quiescent current to minimize power consumption. It also has soft start and current limited protection in order to ensure maximum efficiency and safety of your system. This device is designed to meet the requirements of the automotive and industrial markets. The TPS2211IDBG4 is an excellent choice for applications that require multiple power sources or for those requiring an adjustable output voltage. Its fast switching, low quiescent current, soft start, and current limited protection features make it an ideal device for power management in all kinds of electronic applications.To control the TPS2211IDBG4, you need the appropriate control signals. On the input side of the device, you\'ll find two enable lines (EN1 and EN2) that can be driven either HIGH or LOW, and two enable bias pins that must be connected to a 1.8V voltage source. All other pins, including the power supply, can be left open.On the output side, the TPS2211IDBG4 has two power switches, one for each channel (SW1 and SW2). When the enable line is driven HIGH, the corresponding power switch closes and the output is connected to ground. When the enable line is driven LOW, the output opens and no power is connected to the output. As a result, the voltage level of the output is determined by the resistors connected between the output and VCC (which sets the output voltage).In summary, the TPS2211IDBG4 is a highly versatile PMIC that can be used in a wide range of applications that require a multi-source power system. Its fast switching, low quiescent current, soft start, and current limited protection features make it an ideal choice for power management in all kinds of electronic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description