TPS54233DG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Texas Instruments offers a DC-DC buck regulator with its TPS54233DG4. This device is a typical switching regulator, where the output changes by manipulating the input via a cycle of on and off periods for a switching element such as a field effect transistor (FET). In this device, the FET is additionally protected from over-current conditions by a current limit circuit. The switching regulator is, in essence, a voltage regulator comprising all of the active components necessary for regulating a DC output voltage from a DC input voltage.

Application field of TPS54233DG4 mainly include automotive vehicle systems, industrial, consumer and telecommunications applications. It is ideal for space-confined applications as it offers a wide input voltage range of up to 36V. It also offers adjustable output current limit and programmable switching frequency. The LDO and SYNC functions are available to meet various customer needs.

The TPS54233DG4 can be easily configured with an external loop compensator and low-side current sensing components to counteract the effects of the operating temperature and output capacitor construction. Its superior transient response and low output voltage ripple make the device very attractive in terms of low EMI applications. It also integrates advanced protection features such as Over-Current Protection (OCP), Over-Temperature Protection (OTP), Under-Voltage Lockout (UVLO) and soft start.

The operating principle of TPS54233DG4 is relatively simple. It consists of two stages, an input stage and an output stage. The input stage consists of a P-channel MOSFET switch which is at an off state at the beginning of each cycle. When the P-channel switch is in an \'on\' state, the drain voltage of the MOSFET switch is at a low voltage. This reduces the voltage at the nodes connected to the switch and from there, the output voltage is regulated. The drain voltage of the MOSFET switch is then increased which results in the increase of voltage at the nodes connected to the switch and from there, the output voltage increases until the second stage is reached which is the point at which the output voltage reaches its desired value.

The TPS54233DG4 then uses the inductor to transfer energy from the input stage to the output stage and the internal feedback voltage loop remains active to regulate the amount of energy transferred to the output stage. The internal feedback voltage loop consists of an error amplifier, an internal current source and a loop filter. The error amplifier is responsible for sensing the output voltage and adjusts the voltage across the MOSFET switch to maintain the desired output voltage. The internal current source is used to set the maximum current of the load and the loop filter is used to dampen oscillations and to reduce the noise of the voltage regulator.

In short, the TPS54233DG4 is a DC-DC buck regulator designed for a wide variety of applications such as automotive vehicle systems, industrial, consumer and telecommunications applications. It has a wide input voltage range, adjustable output current limit, programmable switching frequency, LDO and SYNC functions, superior transient response and low output voltage ripple, as well as advanced protection features such as OCP, OTP, UVLO and soft start. The operation of the device is based on the principle of manipulating the input by a cycle of on and off periods for a switching element such as a FET to regulate a DC output voltage from a DC input voltage.

The specific data is subject to PDF, and the above content is for reference