TPS54614PWPRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TPS54614PWPRG4 is a member of Texas Instruments\' TPS5460x family of regulators. This family of products consists of synchronous step-down DC-DC converters. It is part of a DC-DC regulator series that is specifically designed for meeting the power-management challenges associated with high-voltage Smart Power Stages (SPSs). It is a two-phase architecture thus providing high-performance and robust control of voltage across the load.

The TPS54614PWPRG4 is a 25 A, 2.2A LDO linear regulator with an operating frequency range of 0.8 MHz to 13 MHz. It uses a differential amplifier to sense the input voltage and ensure accurate voltage regulation. It features a power-on reset input and output enable for system control. Additionally, it features an enable pin for additional system level control.

The main application of the TPS54614PWPRG4 is in automotive power-management solutions. It is used to power microcontrollers, backlight LEDs, and other systems with stringent load transients. Its high efficiency and low quiescent current make it an ideal choice for efficient power converters in automotive applications. Additionally, this device is also suitable for consumer electronic applications such as battery management systems.

In terms of the TPS54614PWPRG4 working principle, it is synchronous step-down DC-DC converter that uses primary and secondary stages to control voltage levels. The primary stage is used to drive the PWM control loop and the secondary stage has two high current drivers to drive the power MOSFET switches. The primary stage is designed with a current source for maximum output current accuracy and transient speed. The secondary stage has two high-current drivers designed to drive the power MOSFETs at up to 3 MHz for higher efficiency and faster transient response.

The TPS54614PWPRG4 works in two phases in order to regulate voltage. During the first phase, the primary stage is active and the output voltage is maintained at a predetermined and constant level. During the second phase, the secondary stage is activated and the output voltage is increased to a higher level than the voltage of the regulator. This allows the power-supply rails to be set at precisely the desired output voltage level. In addition, the device also features an over-voltage protection feature to ensure that the output does not exceed the maximum allowed voltage.

The TPS54614PWPRG4 is a highly efficient device, providing up to 96% efficiency at low output voltages. This allows for fewer heat losses, improved system performance and reduced system power consumption. Additionally, the voltage regulation accuracy is excellent compared to other similar controllers, with an output accuracy of 0.5% over temperature and load. The switching frequency can be adjusted via the on-board SPI interface, allowing for easy adjustment and customization of the operating parameters.

Overall, the TPS54614PWPRG4 is an effective and reliable step-down DC-DC switch-mode regulator with dual-phase control and an exceptional range of features and performance. Its ability to regulate voltage with high accuracy and low power consumption makes it suitable for powering microcontrollers, LED backlights and other demanding automotive power management solutions.

The specific data is subject to PDF, and the above content is for reference