TPS62806YKAT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TPS62806YKAT is one of the most advanced DC/DC switching regulators developed by Texas Instruments. It is a high voltage switching regulator that is designed for a wide range of applications such as power conversion, communication and automotive systems. It is used in situations where a high current and high efficiency application is needed.

The TPS62806YKAT is a synchronous step-down switching regulator capable of delivering up to 5A output current at 7.5V output voltage. The device is designed to enable high efficiency and fast transient response when working with high output currents. The device is capable of operating over an input voltage range between 2.6 V and 5.5V, and is capable of operating at up to an 80% duty cycle (3.3VOUT at 4.2VIN with 5A load current).

The TPS62806YKAT uses a pulse-width-modulated (PWM) regulator control architecture, which allows for accurate and efficient control of the output voltage. To improve the transient response, the device uses a transconductance error amplifier (TCEA) with a non-overlapping regions of active control. This allows for fast response to load transients, with the error amplifier controlling the output voltage over a wide input voltage range.

The TPS62806YKAT is equipped with a number of features that make it suitable for a range of applications. These features include programmable frequency, internal soft-start, under-voltage lockout, over-current protection, and thermal protection. The device also features a programmable feedback voltage compensation level, which allows for optimized loop settling times.

The TPS62806YKAT is an ideal regulator device for high performance power conversion applications such as high efficiency LED lighting, system power, automotive, and other demanding design applications. The device is also well-suited for applications where fast transient response, a wide input voltage range, and a low quiescent current are required.

The TPS62806YKAT application fields include:

• Automotive applications, such as dash panelling, headlamps, and exterior lighting.
• Industrial control systems, such as robotics and automation.
• LED lighting applications, such as lighting panels and flood lights.
• Communication systems, such as Ethernet and USB controllers.
• High efficiency power supplies, such as notebook adapters and consumer electronics.
• Avionics systems, such as aircraft instrumentation.

The TPS62806YKAT working principle is based on a synchronous, step-down regulator architecture. This regulator architecture is based on the control of the output voltage through a pulse-width-modulated approach. The device uses an error amplifier to compare the output programmed voltage with the actual output voltage and adjusts the duty cycle of the switch to maintain desired output voltage. The duty cycle is then used to control the output current, which is proportional to the duty cycle.

The device also features a non-overlapping regions of active control for the error amplifier, which allows for fast response to load transients and improved line regulation. The device also features programmable frequency, internal soft-start, under-voltage lockout, over-current protection, and thermal protection. The device also has a programmable feedback voltage compensation level, allowing for increased loop settling times.

Overall, the TPS62806YKAT is a high performance and reliable regulator device, suitable for a range of applications. With its advanced features, the device is capable of providing precise output current and voltage control while still providing robust protection against overloads and overheating.

The specific data is subject to PDF, and the above content is for reference