TPS68000DBTRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TPS68000DBTRG4 is a boost converter with a controller (ballast) design specifically created to help with lighting control. As the name implies, it is a boost converter with a highly integrated circuit (IC) that is capable of controlling current and voltage.

The TPS68000DBTRG4 is a non-inverting buck-boost technique, designed to provide efficient, cost-effective power conversion in a wide variety of applications. It is ideal for applications such as dimmable lighting, led lighting, and wall packs. The TPS68000DBTRG4 enables maximum performance due to its low input voltage range, low startup current, and high efficiency.

The TPS68000DBTRG4 consists of two main components: the Control IC and the gate driver. The gate driver is a high current driver, specifically designed to provide efficient driving capabilities for the Control IC. The Control IC features a sensing pin to detect the input voltage, making sure that the boost converter is always operating within its recommended operating range. It also features over-voltage-protection, under-voltage-lockout, and brown-out protection, ensuring that the output voltage is always stable and within the specified limits.

The TPS68000DBTRG4 has two operating modes: On Mode and Off Mode. On Mode is when the input voltage is above the given limit, allowing the boost converter to operate. In this mode, the boost converter will regulate the output voltage by adjusting the switching frequency. It will also reduce the duty cycle at higher input voltage levels to optimize efficiency. Off Mode is when the input voltage is below the given limit, which causes the boost converter to stop operating.

The TPS68000DBTRG4 can also be used for lighting control applications. It is designed with a dimming interface output for controlling a triac dimmer, allowing for flicker-free dimming of LED lighting and other dimmable lighting products. The dimmable interface also features a PWM input, allowing for dimming control through a microcontroller or other device. Since the TPS68000DBTRG4 features low-power mode and ESD protection, it can be used with confidence to control LED lighting products.

In addition to its use in lighting control applications, the TPS68000DBTRG4 can also be used for power-factor correction (PFC) applications. It can control both active and standby mode. In standby mode, the TPS68000DBTRG4 automatically enters a low-power mode, allowing for fast transient voltage and current response. It can also transition quickly from active to standby when the load changes, minimizing losses from the switchgear and power losses from the PFC.

Overall, the TPS68000DBTRG4 is a versatile boost converter designed for applications such as lighting control and power-factor correction. It is capable of providing efficient and cost-effective power conversion in a wide variety of applications. Additionally, it features a dimming interface output, low-power mode, ESD protection, and over-voltage-protection, ensuring reliable operation and maximum performance.

The specific data is subject to PDF, and the above content is for reference