TPSC106K020R0500

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	--
Features:	General Purpose
Manufacturer Size Code:	C
Lead Spacing:	--
Height - Seated (Max):	0.110" (2.80mm)
Size / Dimension:	0.236" L x 0.126" W (6.00mm x 3.20mm)
Package / Case:	2312 (6032 Metric)
Mounting Type:	Surface Mount
Lifetime @ Temp.:	--
Series:	TPS
ESR (Equivalent Series Resistance):	500 mOhm
Type:	Molded
Voltage - Rated:	20V
Tolerance:	±10%
Capacitance:	10µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Tantalum capacitors are type of polarized capacitors consisting of two metallic electrodes separated by a tantalum dielectric layer. TPSC106K020R0500 is an example of a tantalum capacitor which is a preferred choice for many applications due to its excellent electrical and mechanical properties. The capacitance of the TPSC106K020R0500 is 0.2 μF, voltage rating of 10V, and ESR equal to or less than 0.5 ohms. The maximum operating temperature of the capacitor is 125°C.

Application Field

TPSC106K020R0500 tantalum capacitors have a wide range of applications in the electronic industry due to its high performance. They are primarily used in electronic applications such as filters, power supplies, switching power supplies, noise suppression, timing circuits and pulse forming networks. These capacitors are also used in medical devices and communications devices for signal amplification and filtering.Due to their low ESR and low leakage current, TPSC106K020R0500 capacitors can be used in high-frequency circuits, where conventional electrolytic capacitors are not suitable. These capacitors are also suitable for low-ESR DC-to-DC converter applications.

Working Principle

The TPSC106K020R0500 capacitors are divided into two parts by a tantalum dielectric layer. The two metallic electrodes are connected with each other by a terminal cap. When a voltage is applied between the two electrodes, current will flow through the two electrodes which will cause the two surfaces of the dielectric layer to be charged up and this in turn causes a lattice distortion in the dielectric. This lattice distortion increases the capacitance of the device.The capacitance of the TPSC106K020R0500 capacitors is therefore dependent on the voltage applied to it as well as the temperature. As the voltage increases, the capacitance also increases, however, at higher temperatures the capacitance decreases. The capacitance is also dependent on the ESR, which is usually measured in ohms.

Conclusion

The TPSC106K020R0500 capacitor is a popular choice due to its excellent electrical and mechanical properties. It has applications in a wide range of industries, including electronics, medical devices, and communications. Its low ESR, low leakage current, and temperature dependence of capacitance make it a suitable device for high frequency circuits and other applications. Its working principle is based on a lattice distortion in the dielectric caused by the voltage applied to the device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description