TR3E157M010C0100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are electrical components that are used in a wide range of applications, due to its high capacitance-to-volume ratio. The TR3E157M010C0100 is a type of tantalum capacitor, primarily used in power supplies, DC-DC converters, and other analog or digital circuits for energy storage or voltage filtering. It is a surface mount device, with the code following the standard JEDEC marking code.

The TR3E157M010C0100 is an electrolytic capacitor, which has a higher capacitance-to-weight ratio than a ceramic capacitor, and is far superior in terms of electrical performance. The device is shown in the diagram below, and has an operating temperature range of -55°C to +125°C. It has an effective decrease in capacitance with increasing temperatures.

The TR3E157M010C0100 is a general-purpose electrolytic capacitor, suitable for use in a wide range of circuit applications. It has a voltage rating of 10V, and a capacitance of 0.01 microfarads. It is commonly used in mobile phones and other portable devices for energy storage, as well as in power supplies as a voltage filter.

The working principle of the TR3E157M010C0100 is based on the fact that electric charge can be stored in an electrostatic field. When a voltage is applied to the capacitor, a layer of positive ions is formed on one side and a layer of negative ions is formed on the other side. This creates an electrostatic field in between the layers, allowing a charge to be stored and maintained within the capacitor.

The TR3E157M010C0100 has an effective dielectric thickness of approximately 5.7 µm. The dielectric material used in the device is a tantalum oxide, which is the main reason for the device\'s superior electrical performance. The oxide layer acts as an insulating layer, preventing current leakage and allowing the capacitor to store a large amount of energy in a small volume.

In addition to its use in energy storage, the TR3E157M010C0100 is often used in filtering circuits, in order to reduce the ripple noise that can cause voltage instability. The device is usually placed across the power supply rail, and is used to absorb high-frequency electrical noise, thus improving the signal-to-noise ratio. This can improve the power efficiency of the device, and can also prevent any unexpected voltage fluctuations.

The TR3E157M010C0100 is the ideal device for applications where power efficiency and noise suppression are required. With its high capacitance-to-volume ratio and low leakage current, the device offers superior electrical performance in a wide range of applications. This makes it an ideal choice for powering mobile devices, or for use in other power-sensitive applications.

The specific data is subject to PDF, and the above content is for reference