TRS3243CDW

Series:	--
Packaging:	Tube
Part Status:	Discontinued at Digi-Key
Type:	Transceiver
Protocol:	RS232
Number of Drivers/Receivers:	3/5
Duplex:	Full
Receiver Hysteresis:	500mV
Data Rate:	250kbps
Voltage - Supply:	3 V ~ 5.5 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	28-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	28-SOIC
Base Part Number:	TRS3243

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TRS3243CDW

Application Field

TRS3243CDW is the world\'s first single-chip transceiver that combines a transceiver, receiver, and drivers on a chip. It is designed for applications that require very high performance communications, such as broadband multimedia. The transceiver supports USB 2.0, SATA, and USB 3.0 as well as a range of protocols, including LVDS, I2C, SPI, UART, and Jtag.The device is capable of transmitting and receiving data at speeds of up to 600 Mbps, and is ideal for use in storage, networking, and communications applications where high-speed, low power and low latency signals are needed. In addition to its primary application, this device can also be used as an integrated solution in wireless, automotive, and industrial applications.

Working Principle

The TRS3243CDW transceiver consists of two main parts: the driver, which is responsible for driving the output signal, and the receiver, which is responsible for detecting the incoming signal. The driver section sends out the signal while the receiver receives it.The driver and receiver are both connected to the TRS bus, which is a dedicated bus that is used to transport signals between devices. This bus has a maximum data rate of 600 Mbps and is used for data transfer between the device and the host, as well as for communication between the device and other devices on the bus.The driver section consists of two driver sections and two receivers. The first section takes in the input signal and sends it to the output pin. The second section takes the output signal from the first section and sends it to the receiver section.The receiver is responsible for detecting the input signal, and operates in a linear fashion. It samples the input signal and stores the sample points in a buffer. Then, it converts the sample points into digital values.The digital values are then used as input to the driver to drive the output signal. The output signal is transmitted over the TRS bus and is sent to the host interface.The transceiver has two modes of operation: asynchronous and synchronous. In synchronous mode, the digital values that are sent to the driver are sent at the same rate as the input signal, while in asynchronous mode, the rate of data sent by the driver can vary. Both modes provide reliable performance in real-world environments.The TRS3243CDW transceiver also features power-saving features, including a standby mode that allows the device to save power when not in use. This mode automatically switches off the receiver section when the device is idle.Overall, the TRS3243CDW transceiver provides a high level of performance and power efficiency, making it ideal for high-speed communication applications. Its design enables high-speed data transfers and low power consumption, making it suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description