TRSF3223IDWRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TRSF3223IDWRG4 is a 3.3V, Differential Bus Transceiver which is suitable for bidirectional data transmission on a differential bus line. It is configured as a driver and receiver and hence performs both transmission and reception functions. To read data from the bus, the so-called receive enable control pin (REN) is used, while data is received in the output port (OD) and parity output (PR). The driver output (DO) can be used to write data to the bus.

The TRSF3223IDWRG4 can be used in a variety of applications, such as in high-speed data communications, automotive networks, and industrial control systems. It can be used to interface two or more digital systems, where the interfaces must be carefully designed to ensure reliable data transmission. Additionally, it can be employed as a buffering or isolation device to protect one part of the circuit from the other, such as in medical applications.

The TRSF3223IDWRG4 transceiver is a differential bus transceiver, meaning that it allows for the transmission of signals through differential pairs. This type of transceiver is well-suited for data transmission over longer distances and in noisy environments, since it is more immune to common mode noise than single-ended drivers. In a differential system, the transmitted signal is sent through two wires, each with an opposite polarity, and the output is measured as the difference in signals between the two wires.

The TRSF3223IDWRG4 driver works through the two pins labeled REN and DO. The REN pin controls the driver and is used to enable receive operations, while the DO pin controls the driver output and is used to write data to the bus. When the REN pin is low, the receiver is enabled and the output port (OD) will be set to the data that is on the bus. When the DO pin is high, the driver will drive a logic one onto the bus. Conversely, when the DO pin is low, the driver will drive a logic zero onto the bus.

The output pins on the TRSF3223IDWRG4 are labeled OD and PR. The OD pin can be used to read data at high speed, while the PR pin is used to evaluate the different kinds of signaling within the bus, such as error detection. This is especially useful in bus systems that use parity error checking to ensure data reliability.

In summary, the TRSF3223IDWRG4 is a 3.3V, Differential Bus Transceiver that can be used in a wide variety of applications to interface two or more digital systems. It is comprised of two components—a driver and a receiver—and works through two pins, the REN pin and the DO pin. The output pins on the TRSF3223IDWRG4 are labeled OD and PR, and can be used to read data at high speed and evaluate the different kinds of signaling within the bus.

The specific data is subject to PDF, and the above content is for reference