TRSF3238ECDBR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TRSF3238ECDBR, which is a surface mountable device, is classed as one of three Driver/Receiver/Transceiver (DRT) and is used in a variety of circuit paths, primarily within Lane buses and associated dynamic control systems. It has a built-in driver and receiver, meaning that it can be used as both a transmitter and a receiver in a given application. This has the benefit of making the device a flexible and cost-effective solution for applications that require both driver and receive operations.

The TRSF3238ECDBR has three pin outputs, one of which is used for the input application and the other two for the driver and receiver, respectively. The TRSF3238ECDBR is able to provide a range of differential output, from 15 mV to 5 V, depending on the voltage, allowing for the device to be used for high-speed and heavy-load applications.

There is also a high common mode range of up to 14.5 V, reducing the number of components needed in the circuit path, as the TRSF3238ECDBR output can used for the majority of interfaces. In addition the device benefits from an extremely low quiescent current consumption of 0.2 μA, enabling longer battery power periods.

The most common applications for the TRSF3238ECDBR are Ethernet communications and LANs as they offer a robust solution that is able to provide either a differential driver or suitable receiver solutions. It is also suitable for Real-Time Clock (RTC) operations and time stamps generation, Short Range Physical (SRP) layers, USB communications, Serial and GPIB (general purpose interface bus).

The TRSF3238ECDBR’s working principle combines both a single-ended driver with a differential input. By utilizing the transmit and receive drivers, it is able to provide solutions where differential data signals are required. The working principle of this device is based on the concept of using generated electric fields to transmit signals from one source to another. The generated electric fields create a differential voltage across the two pins of the TRSF3238ECDBR, which is ultimately measured in different Voltage levels in order to make up the transmitted data.

The TRSF3238ECDBR operates by using impulse voltages that are conducted from one pin to the other in the device. The voltage levels are then transmitted to the destination pin which in turn switches on the receiver and amplifies the signal. In order for this to work, it needs to have a minimum amplitude level, which is typically set by the Fault-Lining Control (FLC) in the application, in order to trigger the receivers and transmitters in the circuit path.

All these factors, in combination with its low common-mode voltage range, low quiescent current consumption, easy surface mounting and wide dynamic range make the TRSF3238ECDBR an ideal choice for applications that require controlled transmission and reception of elements in order to create the desired effects.

In summary the TRSF3238ECDBR is a DRT (Driver/Receiver/Transceiver) device, used for both transmitting and receiving data signals across a range of application fields. It has a wide common-mode voltage range, low quiescent current consumption, surface mounting and a wide dynamic range that allow it to be used in both high-speed and heavy-load applications. The TRSF3238ECDBR works by using generated electric fields, which create a differential voltage across two pins, and amplifies the signal to a desired voltage level, triggering the receiver and transmitter.

The specific data is subject to PDF, and the above content is for reference