| Allicdata Part #: | TS10KL80D3G-ND |
| Manufacturer Part#: |
TS10KL80 D3G |
| Price: | $ 0.72 |
| Product Category: | Discrete Semiconductor Products |
| Manufacturer: | Taiwan Semiconductor Corporation |
| Short Description: | BRIDGE RECT 1PHASE 800V 10A KBJL |
| More Detail: | Bridge Rectifier Single Phase Standard 800V Throug... |
| DataSheet: |  TS10KL80 D3G Datasheet/PDF |
| Quantity: | 987 |
| 1 +: | $ 0.64890 |
| 20 +: | $ 0.57425 |
| 40 +: | $ 0.51865 |
| 100 +: | $ 0.45379 |
| 260 +: | $ 0.39824 |
| 500 +: | $ 0.35192 |
| 1000 +: | $ 0.27783 |
| 2500 +: | $ 0.25931 |
| 5000 +: | $ 0.24634 |
| Series: | -- |
| Packaging: | Tube |
| Part Status: | Active |
| Diode Type: | Single Phase |
| Technology: | Standard |
| Voltage - Peak Reverse (Max): | 800V |
| Current - Average Rectified (Io): | 10A |
| Voltage - Forward (Vf) (Max) @ If: | 1V @ 2A |
| Current - Reverse Leakage @ Vr: | 5µA @ 800V |
| Operating Temperature: | -55°C ~ 150°C (TJ) |
| Mounting Type: | Through Hole |
| Package / Case: | 4-SIP, KBJL |
| Supplier Device Package: | KBJL |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Bridge Rectifiers are a category of diodes that convert alternating current (AC) to direct current (DC). Bridge rectifiers are used in a wide range of applications, from small household appliances such as household electronics and automobiles, to large industrial systems and medical equipment. Bridge rectifiers are often used to power DC electrical motors, to replace electromechanical relays, and for various other purposes such as power-supply circuitry for transistor radios. The most common type of bridge rectifier is the center-tapped transformer bridge rectifier, also known as the TS10KL80 D3G.
The TS10KL80 D3G bridge rectifier is constructed in a three-phase bridge configuration. It consists of three transformers mounted on top of each other and connected to the output terminals. The transformer in the center is energized by the primary winding and produces three-phase output. Each of the three output transformers is connected to one of the three rectifier diodes, which form a full-wave rectifier circuit. The output of each diode is then combined in series to form the DC output.
The main advantage of using a TS10KL80 D3G rectifier is that it provides a very low voltage drop and high efficiency, as well as good overload, surge, and surge protection capabilities. The output of the rectifier is always in the same phase, so it will not be affected by any phase shifts in the input signal. Furthermore, the rectifier can be configured to run with a wide range of input voltages and frequencies, as well as with different load and output currents.
The TS10KL80 D3G rectifier is used for a variety of purposes, including regulating the current supplied to an alternator in an automobile, power supply design in radio receivers, and power factor correction for certain equipment. It is also used in harmonic filter networks and other high-frequency applications. In addition, it can be used to control the speed of a DC motor, or to reduce the amount of ripple current in the output.
Bridge rectifiers are an ideal solution for many power-supply and power-distribution applications. They provide a smooth and efficient output, and their reliable operation ensures that the unit will perform when it is needed most. The TS10KL80 D3G is a highly reliable and cost-effective rectifier that can be used in a wide variety of applications. In addition, it has many advanced features and options that make it ideal for use in a variety of applications.