TS462CST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TS462CST is a high-output amplifier typically used in instrumentation and operational amplifiers. It is a single-ended, low-noise amplifier with a high slew rate that allows it to provide an output signal with higher fidelity. It is a valuable tool used in a variety of applications and is particularly well suited for use in oscilloscope and signal processor applications.

It is a very efficient amplifier due to its high gain, large slew rate, and small output impedance. The amplifier has a voltage gain of up to 5000, and can provide a current gain of up to 350 μA (5V). The device is matched for input and output impedance, so that it is unlikely to cause signal variations during the signal transfer process. The pulse response time is fast; it is able to accurately capture waveforms for waveforms with more than 200 MHz bandwidth and a slew rate of 20 V/μs.

The simplified circuit diagram of the TS462CST is shown in Figure 1. A unity gain buffer amplifier is used to drive the input of the amplifier. This amplifier has a relatively low noise figure, allowing it to accurately capture fast waveforms with little distortion. The output of the buffer amplifier is connected to the input of the power amplifier, which provides the current gain of the device.

The power amplifier stage consists of a class B common emitter circuit. The high frequency performance of the amplifier is largely determined by the choice of integrated circuit(IC) being used in this stage. The main transistors used in the amplifier are rated for up to 20V and have a typical gain of 60 dB. The gain and power bandwidth of the amplifier is determined by the time constants of the internal transistors, which are determined by the physical parameters of the IC.

The TS462CST is typically used in applications where the amplifier is required to drive a load impedance of 1 kiloohm or greater. This amplifier can also be used to drive high-impedance loads, such as high-voltage transistors or digital logic circuitry. The extremely low output impedance allows for large signal swings with minimal distortion. The low noise level of the device is also very desirable, allowing for clean and accurate signals.

The power supply for the TS462CST amplifier is typically rated from 5V to 12V. The power supply must provide the high-current, high frequency power necessary for the amplifier to achieve its impressive performance. Additionally, the device must be able to withstand high temperatures (up to 150 °C) and high-humidity conditions.

The TS462CST is also a low-cost device, making it a great choice for any budget-minded application. The device is also easy to configure and use, and comes with a powerful set of features that make it a great choice for signal processing applications. The device is a great choice for those seeking to increase signal fidelity, reduce signal distortion, and minimize power consumption.

The specific data is subject to PDF, and the above content is for reference