TS5V330DBQR Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A TS5V330DBQR is an analog switch from the interface-analog switches-special purpose range. It is a 5V powered double-pole, single-throw (DPST) switch with quick charge-discharge output. In addition to its low input leakage current, it is designed to keep the output (IO) voltage constant when the electrical network voltage of the device is changing. This is achieved through the internal voltage regulator (IVR) control mode. This device utilizes the low addition capacitance of <20pF.

The TS5V330DBQR analog switch is a low-power, low-dropout, analog SPST switch that switches between two logic circuits based on the logic level applied to its input pin. It works in such a way that when the logic level is high, the switch is "on" and the output pin of the switch is connected to the input pin. Similarly, when the logic level is low, the switch is "off" and the output becomes disconnected from the input.

The TS5V330DBQR is typically used in any systems where isolation between two different public-domain circuits or levels is required. The analog switch is also suitable for applications involving high frequency signal transmissions such as radio-frequency (RF) systems.

The device offers greater versatility because it can handle higher currents than traditional switches and can be triggered by either logic or analog signals. It is ideal for applications where very fast switching times are required and low input capacitance is desired. It is suitable for a wide range of applications such as test and measurement, industrial, automotive, telecommunications, and audio video.

The TS5V330DBQR is a voltage-controlled analog switch that works on the principle of capacitive field-effect conduction. It has two terminals (input terminal and output terminal) for connecting it to the logic system. The input is used to control the switching state of the device - when a logic zero is applied, the switch closes and a logic one is applied, the switch opens. The gate voltage of the switch also determines its ‘on’ state. This gate voltage is generated by the voltage regulator, which is connected to the input terminal and the output terminal of the device.

The TS5V330DBQR operates in two modes - the static (or open-loop control) mode and the dynamic (or closed-loop control) mode. In static mode, the voltage regulator supplies a constant input voltage to the switch which is then used to control its switching state. The dynamic mode on the other hand, uses the voltage regulator to control the input voltage applied to the switch. This allows for faster switching times and better signal integrity.

In addition, the TS5V330DBQR has a number of advantages over other analog switches such as less switching errors and reduced power consumption. In addition, its internal charge pump has the ability to quickly charge or discharge its output voltage, allowing it to switch between two signals quickly and accurately. Also, it has the ability to operate in both low and high voltage environments with minimal changes to its on-resistance and insertion-loss characteristics.

The TS5V330DBQR is a versatile and efficient analog switch and can be used in a wide range of applications including test and measurement, medical, consumer, and industrial applications. Its low power, low dropout, and fast switching speed makes it an ideal choice for systems that require a reliable and quick switching solution. The device is also suitable for applications where high frequency signal transmissions are required and low input capacitance is desired.

The specific data is subject to PDF, and the above content is for reference