TS9011PCY RMG Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TS9011PCY RMG is a member of Texas Instruments` family of linear voltage regulators, and is a part of their Power Management IC (PMIC) portfolio.It is a low dropout (LDO) linear voltage regulator, with low quiescent current (low IQ) and a low ground current. The voltage regulator is capable of delivering up to 1 A of output current, and can regulate a 3.3 V output voltage from an input voltage between 0.4 V and 7 V. The LDO has an adjustable reference voltage, which is factory set at 1.2 V, 1.8 V and 2.5 V, and can be adjusted through an external resistor. The TS9011PCY also features an enable pin which can be used to enable and disable the regulator, providing additional system flexibility.

The TS9011PCY is primarily used to regulate the supply voltage to digital logic, as it is stable over a wide range of operating conditions. It is suitable for use in both battery-powered and AC mains applications, providing the power supply for all the connected devices over a wide range of input voltages. The LDO is also well suited for use in high-end processors, FPGAs and ASICs, as its low output impedance guarantees low noise and good transient response performance.

The TS9011PCY is primarily used in applications requiring low output voltages and low quiescent current. These applications typically require efficient voltage regulation with a minimum of wasted power. This can be achieved by using the TS9011PCY, as it has an integrated low dropout voltage and low quiescent current; these features making it ideal for battery-powered applications where power and efficiency are critical.

The TS9011PCY also has a wide range of protection features, including current limiting, temperature sensing, and over-voltage protection. This ensures the regulator is well-suited for a variety of applications that require stability, accuracy and protection. These protection features make the TS9011PCY suitable for use in mission-critical or safety-related applications, where any unexpected failure must be avoided.

The working principle of the TS9011PCY is based on the linear voltage regulator design. It consists of an amplifier whose output voltage is proportional to the input voltage. This amplifier is designed so that the output current is limited to a certain maximum, preventing any inrush current from being sent to the load. The output voltage of the amplifier is regulated using an error amplifier, which compares the actual output voltage to the reference voltage. The amplifier adjusts the voltage up or down to match the reference voltage, which is set using an external resistor. This ensures the output voltage is stabilized and accurate over a wide range of input voltages.

In summary, the TS9011PCY is a low dropout linear voltage regulator suitable for use in a wide range of applications. It is capable of providing up to 1 A of output current, and can regulate a 3.3 V output voltage from an input voltage between 0.4 V and 7 V. The adjustable reference voltage and enable pin add to the flexibility of the regulator, while the integrated features such as current limiting and temperature sensing ensure that it is safe and reliable to use. The TS9011PCY is a highly efficient linear voltage regulator, capable of providing accurate, stable, and reliable power supply for all connected devices.

The specific data is subject to PDF, and the above content is for reference