TSC1031IDT

Voltage - Input Offset:	500µV
Base Part Number:	TSC103
Supplier Device Package:	8-SO
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply, Single/Dual (±):	2.7 V ~ 5.5 V, ±1.35 V ~ 2.75 V
Current - Output / Channel:	26mA
Current - Supply:	200µA
Series:	--
Current - Input Bias:	10µA
-3db Bandwidth:	700kHz
Slew Rate:	0.6 V/µs
Output Type:	--
Number of Circuits:	1
Amplifier Type:	Current Sense
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TSC1031IDT is a type of linear amplifier used to amplify and provide power for integrated circuits and other components in instrumentation, operation amplifiers (OP amps), buffer amplifiers, and other applications. The power amplifier is designed to operate with low power consumption, low noise, and low distortion. It also provides high dynamic range, high gain, and low thermal drift with low output impedance.The TSC1031IDT is an integrated circuit with several built-in features. It is considered a dual-channel amplifier, meaning that it can amplify both the positive and negative outputs of an input signal and can switch between the two output channels. It features two gain stages, an integrated programmable gain amplifier, and two resistive voltage followers. The amplifier includes an amplifier input circuit that includes an input buffer, a comparator for signal amplitude detection, and a voltage reference as well as an output voltage clamp for protection from overvoltage.The TSC1031IDT has a wide range of applications in instrumentation, operation amplifiers, and buffer amplifiers. It is capable of amplifying up to 10 volts of input and up to 20 volts of output. As an operation amplifier, it is designed to provide an output voltage that is proportional to the input current—in an OP amp application, this output is usually referred to as an output voltage. Instrumentation applications can benefit from the low power consumption, low noise, and low distortion of the TSC1031IDT.Buffer amplifiers are used in a variety of applications, from driving microcontrollers to powering optical isolators. They are commonly used in power supply applications where there are high currents or short-current pulses. The TSC1031IDT is ideal for buffer amplifier applications as it provides a high input impedance and a low output impedance. This allows for a high level of control and consistency, especially during current pulses.The working principle of TSC1031IDT is based on a series of individual operations and stages. First, the input signal is received and amplified, then the output voltage is clamped and the output voltage offset is programmed. Finally, the amplifier\'s programmable gain amplifier creates a voltage that is proportional to the input current. With this combination of stages and operations, the TSC1031IDT is able to amplify signals with a wide range of amplitude and with good precision.The low power consumption, low noise, and low distortion of the TSC1031IDT make it a great choice for instrumentation, operation amplifiers, and buffer amplifiers. It is designed to provide an accurate and consistent output voltage and is capable of amplifying up to 10 volts of input and up to 20 volts of output. Additionally, the programmable gain amplifier helps to improve precision and reduce errors. With its low power consumption, low noise, and low distortion, it is the ideal solution for applications needing a reliable and precise amplifier.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description