TSF48Y100DF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TSF48Y100DF float and level sensors are designed to measure the level of liquid in a system and to provide a continuous indication of the measured entity.

The working principle of the TSF48Y100DF is based on the principle of buoyancy. The weight of the float is less than the capability of the medium in the system and it is capable of rising in the medium to a corresponding level, as the liquid level increases. The float is connected to the stem arm, which is connected to an electrical contact on the stem. The stem arm is extended into the stem of the sensor, where it makes contact with the electrical contact.

The electrical contact is connected to a signal transmission system, which sends a signal back to a switch or controller. As the float rises and falls with the liquid level, the contact is made and broken, and a signal is sent that reflects the change in the liquid level. This may be used to activate alarms, open valves, or any other system that requires a level measurement.

The TSF48Y100DF is designed for use in a wide range of application fields such as heavy machinery, automotive, industrial operations, and medical applications. In automotive applications, it is typically used for monitoring and controlling liquid levels in the engine oil tank, fuel tank, and transmission case. In industrial operations, it is used for monitoring and controlling liquid levels in cooling towers, boilers, and steam systems. In the medical field, it is used for monitoring and controlling liquid levels in medical gases, fluid bags, and pumps.

The TSF48Y100DF is also suitable for use in liquid level monitoring and control in shipboard systems, such as ballast systems, fuel tanks, and pump control systems. In addition, it is also suitable for use in environments where high corrosiveness, vibration, or rapid temperature changes may be present. The sensor is equipped with a protective wire cage to protect against accidental contact due to water or other liquids.

The TSF48Y100DF is designed to provide a reliable, accurate, and repeatable indication of the liquid level. It is typically used in applications where accuracy and resolution are important. This type of sensor has a wide dynamic range, and is able to measure very small changes in the liquid level. In addition, it has the ability to measure the liquid level over a wide range of temperatures and can be used in both high and low temperature applications.

The TSF48Y100DF float and level sensors offer many advantages in terms of reliability, accuracy, repeatability, and cost. They are very simple to install and maintain, and are ideal for use in a variety of applications. They offer a reliable and accurate indication of the liquid level, and are suitable for use in a wide range of application fields, from automotive to medical to industrial.

The specific data is subject to PDF, and the above content is for reference