TSH24IDT Integrated Circuits (ICs) |
|
Allicdata Part #: | 497-2321-2-ND |
Manufacturer Part#: |
TSH24IDT |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | STMicroelectronics |
Short Description: | IC OPAMP GP 25MHZ 14SO |
More Detail: | General Purpose Amplifier 4 Circuit 14-SO |
DataSheet: | TSH24IDT Datasheet/PDF |
Quantity: | 2500 |
Voltage - Input Offset: | 2.5mV |
Base Part Number: | TSH24 |
Supplier Device Package: | 14-SO |
Package / Case: | 14-SOIC (0.154", 3.90mm Width) |
Mounting Type: | Surface Mount |
Operating Temperature: | -40°C ~ 125°C |
Voltage - Supply, Single/Dual (±): | 3 V ~ 30 V, ±1.5 V ~ 15 V |
Current - Output / Channel: | 37mA |
Current - Supply: | 2.15mA |
Series: | -- |
Current - Input Bias: | 100nA |
Gain Bandwidth Product: | 25MHz |
Slew Rate: | 15 V/µs |
Output Type: | -- |
Number of Circuits: | 4 |
Amplifier Type: | General Purpose |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Linear amplifiers, such as TSH24IDT,form a vital component in many applications as they amplify signals in an essentially linear fashion. In this article, we will take a closer look at the applications and working principle of TSH24IDT.
Applications
TSH24IDT is an integrated direct-coupled low-noise linear amplifierdesigned for general purpose use in instrumentation, test and measurement systems. It provides excellent distortion characteristics and can be used for modulation, amplification, signal filtering and transmission. The amplifier can also be used for signal conditioning for instrumentation amplifiers, audio mixers and other audio electronics.
The TSH24IDT also finds applications in radio receivers and transmitters, data acquisition systems and oscilloscopes. It is also used in medical imaging systems, including magnetic resonance imaging (MRI) instruments and other clinical diagnostic applications. Other applications include instrumentation and monitoring systems, such as radar, sonar and navigation systems.
Working Principle
The TSH24IDT uses a direct-coupled topology that eliminates the need for coupling capacitors. The converter can be operated in either the inverting or the non-inverting mode, depending on the input and output signals. The amplifier is designed for low distortion and low noise operation, making it ideal for use in sensitive applications.
The amplifier is designed to have a low distortion (^1dB up to 7dB): this is achieved by using high quality components, including metal-oxide semiconductor field-effect transistors (MOSFETs) and complementary metal oxide semiconductor (CMOS) stages. The amplifier is also designed to have a low noise figure (3.5 dB or less), with good common-mode rejection and low power consumption (<10 milliwatts).
The amplifier operates in two main stages: i) the pre-amplifier stage and ii) the main amplifier stage. The input signal is first amplified by the pre-amplifier in order to reduce thermal noise, improve signal to noise ratio and increase the dynamic range. The main amplifier then amplifies the signal to achieve the desired dynamic range. The amplifier can also be configured for use in a feedback loop, in order to regulate the output.
In short, TSH24IDT is an integrated direct-coupled low-noise linear amplifier designed for general purpose use in instrumentation, test and measurement systems. Its features such as low distortion, low noise figure, good common-mode rejection, and low power consumption make it an ideal choice for many applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
TSH22ID | STMicroelect... | -- | 1000 | IC OPAMP GP 25MHZ 8SOGene... |
TSH22IN | STMicroelect... | -- | 1000 | IC OPAMP GP 25MHZ 8DIPGen... |
TSH24ID | STMicroelect... | -- | 1000 | IC OPAMP GP 25MHZ 14SOGen... |
TSH24IN | STMicroelect... | -- | 1000 | IC OPAMP GP 25MHZ 14DIPGe... |
TSH22IDT | STMicroelect... | -- | 2500 | IC OPAMP GP 25MHZ 8SOGene... |
TSH248CX RFG | Taiwan Semic... | 0.15 $ | 6000 | HALL EFFECT SWITCH, OMNI-... |
TSH253CX RFG | Taiwan Semic... | 0.28 $ | 3000 | HALL EFFECT SWITCH, OMNI-... |
TSH251CX RFG | Taiwan Semic... | 0.28 $ | 12000 | HALL EFFECT SWITCH, OMNI-... |
TSH282CX RFG | Taiwan Semic... | -- | 12000 | HALL EFFECT SWITCH, UNIPO... |
TSH253CT B0G | Taiwan Semic... | 0.72 $ | 10000 | HALL EFFECT SWITCH, OMNI-... |
TSH251CT B0G | Taiwan Semic... | 0.72 $ | 9976 | HALL EFFECT SWITCH, OMNI-... |
TSH282CT B0G | Taiwan Semic... | 0.74 $ | 4990 | HALL EFFECT SWITCH, UNIPO... |
TSH2-3TB | Eaton | 15.92 $ | 1000 | SHROUD UL508 63-80A NON-F |
TSH24IDT | STMicroelect... | -- | 2500 | IC OPAMP GP 25MHZ 14SOGen... |
Ultra Precision Current Sense Amplifier ...
Operational Amplifiers - 4-Channel, 10MH...
IC OPAMP GP 600KHZ 8SOICGeneral Purpose ...
IC OPAMP VFB 150MHZ 8UMAXVoltage Feedbac...
IC OPAMP VFB 215MHZ SOT23-5Voltage Feedb...
IC OPAMP BUFFER 660MHZ 8SOICBuffer Ampli...