TST20H300CW C0G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TST20H300CW C0G is a PN rectifier array, specifically designed for high current rectified DC power supply applications. It has a maximum blocking voltage of 300V, and a maximum current of 20A. This makes the TST20H300CW C0G ideal for applications such as high current DC power supplies, battery chargers, and power converters.

Working Principle of TST20H300CW C0G Arrays

The TST20H300CW C0G is a linear PN rectifier array, consisting of two parallel-connected rectifiers. It uses the principle of a linear current flow, in which an incoming alternating current is converted into a direct current by a positive and a negative polarity of the applied voltage. The rectifier array is composed of four rectifier diodes arranged in a bridge configuration and which are connected in reverse biased form. The four diodes each form half of a rectifier in the form of a half-bridge. When the applied voltage is increased to a level that is higher than the reverse breakdown voltage of the diode, the current will start to flow, and the rectifier will begin to conduct. As the applied voltage continues to increase, the current will continue to flow, and the rectifier will start to transfer energy from the AC power source to the DC power supply.

The TST20H300CW C0G array has an efficiency rating of 98%, meaning that 98% of the AC power being fed into the circuit is converted into usable DC power. This high efficiency rating makes the TST20H300CW C0G ideal for applications where power loss is a consideration, such as battery chargers or power converters. Additionally, the array has a forward voltage drop of approximately 0.7V, which means that only a small percentage of the applied voltage is wasted in the form of heat.

Applications of TST20H300CW C0G Arrays

The TST20H300CW C0G rectifier array is suitable for a wide range of applications, including DC power supply systems, battery charging, and power conversion. Its high efficiency rating makes it an ideal choice for applications where power loss is a concern. Additionally, its low forward voltage drop of 0.7V makes it suitable for applications where high current levels are required.

The TST20H300CW C0G has been designed for use in high current applications, such as motor control, voltage regulators, and DC-DC converters. Additionally, the array can be used in AC-DC converters and solar panel controllers. It is also suitable for applications where high current levels are required, such as in electric vehicles and systems.

The TST20H300CW C0G is also suitable for use in a range of general purpose power and lighting applications, such as LED lighting. It is also suitable for a range of other applications, such as simplified switching power supplies, switched-mode power supplies, transfer switches, and medical devices.

Conclusion

The TST20H300CW C0G is a PN rectifier array, with a maximum blocking voltage of 300V, and a maximum current of 20A. It has an efficiency rating of 98%, and a forward voltage drop of 0.7V. This makes the TST20H300CW C0G ideal for applications such as high current DC power supplies, battery chargers, power converters, motor control, voltage regulators, DC-DC converters, switched-mode power supplies, transfer switches, and LED lighting.

The specific data is subject to PDF, and the above content is for reference