TSV524IYPT Integrated Circuits (ICs)

Current - Input Bias:	1pA
Supplier Device Package:	14-TSSOP
Package / Case:	14-TSSOP (0.173", 4.40mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply, Single/Dual (±):	2.7 V ~ 5.5 V
Current - Output / Channel:	55mA
Current - Supply:	45µA
Voltage - Input Offset:	1mV
Series:	Automotive, AEC-Q100
Gain Bandwidth Product:	1.15MHz
Slew Rate:	0.89 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	4
Amplifier Type:	CMOS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TSV524IYPT Application Field and Working PrincipleLinear Amplifiers represent a popular class of electronic components which are used to increase the gain of an electronic signal. Within this category, instrumentation amplifiers, OP amps and buffer amps are the most common type of linear amplifiers. TSV524IYPT amplifiers encapsulated within a 5-pin SIP package, make them very versatile for a wide range of applications. TSV524IYPT Instrumentation Amplifier Working Principle The TSV524IYPT is a low-noise differential input instrumentation amplifier. It includes two separate amplifiers consisting of two common-mode amplifiers with a gain of 2, and two differential amplifiers with a gain of 1. This combination results in a combined gain of up to 4.The two common-mode amplifiers have the same feedback resistance, while the two differential amplifiers have different feedback resistances. When the differential amplifier is biased, the common-mode amplifier\'s gain is slightly less than that of the differential amplifier.The TSV524IYPT features an exceptionally low-noise input stage which allows it to be used in noise-sensitive applications like RF receivers and acoustic sensors. This low-noise input stage is coupled with an output stage that provides very stable output voltages. The output of the amplifier can be adjusted to the desired voltage range with an external resistor. TSV524IYPT OP Amps Working Principle The TSV524IYPT is also a low-noise operational amplifier (op amp). It has a gain of 2 and is ideal for applications requiring precise, high-speed operation, including signal processors and signal conditioning. An input voltage applied to the amplifier is filtered by the input stage and is then amplified by the internal amplifying stage. The signal is then passed through a level shifter which adjusts the output voltage to the desired range. The output signal is then unlimited, providing a constant voltage gain over a wide frequency range. TSV524IYPT Buffer Amps Working PrincipleThe TSV524IYPT is a low-noise, low-distortion buffer amplifier. It is designed to be used to isolate or condition signals in high-frequency applications, such as driving high-speed bus lines or transforming high-current signals.The buffer amplifier has a gain of 1 and is designed to isolate the input signal from the output. It features a high-impedance, low-distortion input stage, which is coupled to a low-output impedance buffer amplifier. The output of the buffer amplifier is then connected to the load.The TSV524IYPT buffer amplifier provides very low noise due to its low-noise input stage and buffer. It is also very efficient, as the input signal is not amplified and only the output voltage is adjusted.ConclusionThe TSV524IYPT amplifier is a versatile and low-noise component that can be used in a variety of applications. It features low-noise instrumentation, OP and buffer amplifiers that can be used to accurately increase the gain of signals. With its combination of low noise and high-performance, the TSV524IYPT is an ideal amplifier for noise-sensitive and high-speed applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description