TSX3702IDT

Current - Output (Typ):	20mA
Supplier Device Package:	8-SO
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Operating Temperature:	-40°C ~ 125°C
Hysteresis:	--
Propagation Delay (Max):	--
CMRR, PSRR (Typ):	85dB CMRR, 89dB PSRR
Current - Quiescent (Max):	8µA
Series:	--
Current - Input Bias (Max):	10pA
Voltage - Input Offset (Max):	5mV @ 5V
Voltage - Supply, Single/Dual (±):	2.7 V ~ 16 V
Output Type:	Push-Pull
Number of Elements:	2
Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TSX3702IDT is a comparator, which can be classified under the Linear - Comparators category. It is a monolithic integrated circuit (IC) with a wide range of applications across industries. This device is typically used in motor control, load switching, power conditioning, and power management. It can also be used for measuring various fault conditions on systems and can be utilized for various precision measurement applications.The TSX3702IDT is a dual-channel CMOS Comparator integrated circuit with a common output. This device features two input pins, one for the non-inverting input and one for the inverting input. It has an adjustable threshold voltage (Vth) pin, and an enable/disable pin. The TSX3702IDT is capable of operating over a wide range of supply voltages and features a low current consumption of less than 4.5mA maximum. It includes a built-in hysteresis control and has a temperature range of -55°C to +125°C.The TSX3702IDT is used to compare the signal level at the non-inverting input with the signal level at the inverting input. The common output of the device depends on the comparison between the two and will give out a low signal level if the input signals are equal and a high signal level if the input signals are not equal. The threshold level is adjustable with the Vth pin, and this allows the user to adjust the sensitivity of the device based on the application’s needs. The enable/disable input pin can be used to put the device in low power mode and can be used for frequency modulation.The TSX3702IDT has a wide range of applications in various industries, primarily in motor control. It can be used to measure the speed, direction and fault conditions of motors for precision control. It can also be used for load switching, with the non-inverting input serving as the detection signal and the inverting input serving as the threshold voltage. It can be used for power management, such as overvoltage protection and power cycling. It can also be utilized for fault detection such as generated voltage or current, and can be used in many precision measurement applications.In conclusion, the TSX3702IDT is a dual-channel CMOS Comparator integrated circuit and is typically used in motor control, load switching, power conditioning, and power management. It is useful in fault detection and other precision measurement applications and can operate over a wide range of supply voltages. It is a device that can be classified under the Linear - Comparators category and has a wide range of applications across industries.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description