TX810IRHHT Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TX810IRHHT is an integrated circuit switch designed and developed by Texas Instruments, Inc. that is used to control and route analog signals. The IC is especially useful in applications where power is low or limited and the system is highly sensitive to noise. It includes three sections: a serial pass-through, a pulse-width modulated (PWM) switch, and a bidirectional trigger-out

The TX810IRHHT\'s pass-through section is designed to direct low-level analog signals without degradation. Its bidirectional trigger-out section is used to control the serial pass-through, whether it is enabled or disabled. Lastly, the PWM switch is used to allow digital input signals to be driven to output.

The bidirectional trigger-out section of the TX810IRHHT provides great flexibility, allowing the serial pass-through to be enabled or disabled based on the digital input signals. For example, if the digital input is a logic low, the serial pass-through is disabled. Conversely, if the input is a logic high, the serial pass-through is enabled. This allows applications to be developed that are highly sensitive to incoming signals and can be controlled in a very efficient manner.

The pulse-width modulated (PWM) switch included in the TX810IRHHT is designed to multiplex signals between two sources. It is based on a switched-capacitor structure and uses a low-power switching method to transfer signals between two sources without introducing additional noise. The switch is designed to be controlled through digital input signals and can be used to implement those requirements that require low-power and low-noise connections.

The TX810IRHHT can be used in a variety of applications, including cellular phones and tablets, audio equipment, consumer electronics, and automotive electronics. In addition to multiplexing and routing analog signals, the IC can also be used to convert or mix analog signals, such as audio signals. It can be used to introduce corrections to reduce noise and distortion due to impedance mismatches in long cables. The IC is also capable of protecting sensitive analog circuits from external interference and electrostatic discharge.

Overall, the TX810IRHHT is an ideal choice for applications where power is low or limited, the system is highly sensitive to noise, and the need exists to control and route analog signals. The IC\'s pass-through, PWM switch and bidirectional trigger-out sections offer great flexibility, allowing for multiplexing, routing, and mixing of analog signals without introducing any additional noise.

The specific data is subject to PDF, and the above content is for reference