TXB0101DCKTG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TXB0101DCKTG4 falls into the category of logic translators and level shifters, devices that are used to convert one type of logic signal to another, providing the necessary voltage level for the signal to work. On the transmission side, it is used to send data to multiple devices, while on the receiving side, it is used to decode and read data received from up to eight devices. Designed with a wide input voltage range and a low supply current, it ensures reliable and fast operation when used in different applications.

Application Field

The TXB0101DCKTG4 can be used in many applications as a translator or level shifter. It can be used for digital microphones, for driving I2C busses, for transferring analog data, and for interfacing devices with different voltage levels such as voltage regulators, power supply systems, processors, and communication networks. It is mainly used in consumer electronics, automotive, telecom, and industrial electronics.

Working Principle

The TXB0101DCKTG4 operates by translating and shifting logic levels from one to another. It can take as input either a high or low logic level, and provides a logic level that is compatible with the receiver. The translators make use of a translator circuit which provides the necessary voltage level and electrical characteristics to enable the data to be received correctly.

The device is equipped with two separate two-channel output drivers. Each driver can accept up to two 10-bit data words, each with a data range of 0 to 3µA. The first channel is the data input which is fed into an output driver through a resistor. This then steps up the voltage to a defined level for data transmission. The output driver then feeds the data to the second channel, where the output voltage is increased further for transmission.

The TXB0101DCKTG4 also includes a built-in pull-up resistor, allowing the user to further configure the logic level of the output data. This pull-up resistor can be enabled or disabled via the on-chip control lines, allowing the output logic level to be adjusted.

This device offers a wide input voltage range of 4.5V to 5.5V, making it suitable for applications with different voltage requirements. The wide operating voltage range of the device allows it to be used in a variety of applications with different operating voltages such as analog and digital microphones, I2C buses, and other low-voltage applications. It also has an active low-power standby mode, allowing it to remain in standby while consuming a minimal amount of power.

Conclusion

The TXB0101DCKTG4 is a versatile and reliable logic translator cum level shifter device. With its wide input voltage range, low power consumption, and ability to be configured via the on-chip control lines, it can be used in a variety of applications. It provides reliable data transfer, allowing devices with different voltage levels to be connected and communicated with, and can be used in digital microphones, I2C buses and other low-voltage applications.

The specific data is subject to PDF, and the above content is for reference